Cura/resources/quality/beamup_s/beamup_s_normal.inst.cfg

[general]
definition = beamup_s
name = BeamUp S Normal
version = 4

[metadata]
material = generic_pla
quality_type = fast
setting_version = 22
type = quality
weight = -1

[values]
adhesion_type = brim
brim_line_count = 5
infill_before_walls = False
initial_layer_line_width_factor = 120.0
layer_height = 0.15
material_print_temperature = 205
material_print_temperature_layer_0 = 230
retraction_amount = 1.5
retraction_speed = 30
speed_infill = 45
speed_layer_0 = 25
speed_print = 45
speed_support_interface = 45
speed_topbottom = 45
speed_wall_0 = 35
speed_wall_x = 45
support_angle = 60
support_enable = True
support_infill_rate = 20
support_interface_enable = True
support_interface_height = 0.45
support_interface_pattern = zigzag
support_interface_skip_height = 0.15
support_offset = 0.8
support_z_distance = 0.2
wall_thickness = 0.8
zig_zaggify_infill = True