Cura/resources/definitions/jellybox.def.json

{
    "id": "jellybox",
    "version": 2,
    "name": "JellyBOX",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "IMADE3D",
        "manufacturer": "IMADE3D",
        "category": "Other",
        "platform": "jellybox_platform.stl",
        "platform_offset": [ 0, -0.3, 0],
        "file_formats": "text/x-gcode",
        "has_materials": true,
        "has_machine_materials": true
    },

    "overrides": {
        "machine_name": { "default_value": "IMADE3D JellyBOX" },
        "machine_width": { "default_value": 170 },
        "machine_height": { "default_value": 145 },
        "machine_depth": { "default_value": 160 },
        "machine_nozzle_size": { "default_value": 0.4 },
        "material_diameter": { "default_value": 1.75 },
        "machine_heated_bed": { "default_value": true },
        "machine_center_is_zero": { "default_value": false },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_start_gcode": {
            "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n;                 Print Settings Summary\n; (overwriting these values will NOT change your printer's behavior)\n;              sliced for:  {machine_name}\n;         nozzle diameter:  {machine_nozzle_size}\n;       filament diameter:  {material_diameter}\n;            layer height:  {layer_height}\n;        1st layer height:  {layer_height_0}\n;              line width:  {line_width}\n;          wall thickness:  {wall_thickness}\n;          infill density:  {infill_sparse_density}\n;          infill pattern:  {infill_pattern}\n;       print temperature:  {material_print_temperature}\n;  heated bed temperature:  {material_bed_temperature}\n;       regular fan speed:  {cool_fan_speed_min}\n;           max fan speed:  {cool_fan_speed_max}\n;                 support?  {support_enable}\n;              spiralized?  {magic_spiralize}\n\nM117 Preparing        ;write Preparing\nM140 S{material_bed_temperature}              ;set bed temperature and move on\nM104 S{material_print_temperature}             ;set extruder temperature and move on\nM206 X10.0 Y0.0       ;set x homing offset for default bed leveling\nG21                   ;metric values\nG90                   ;absolute positioning\nM107                  ;start with the fan off\nM82                   ;set extruder to absolute mode\nG28                   ;home all axes\nM203 Z5               ;slow Z speed down for greater accuracy when probing\nG29                   ;auto bed leveling procedure\nM203 Z7               ;pick up z speed again for printing\nM190 S{material_bed_temperature}              ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature}             ;wait for the extruder to reach desired temperature\nG92 E0                ;reset the extruder position\nG1 F200 E5            ;extrude 5mm of feed stock\nG92 E0                ;reset the extruder position again\nM117 Print starting   ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________"
        },
        "machine_end_gcode": {
            "default_value": "\n;---------------------------------\n;;; Jellybox End Script Begin ;;;\n;_________________________________\nM117 Finishing Up ;write Finishing Up\n\nM104 S0 ;extruder heater off\nM140 S0 ;bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG28 X ;home x, so the head is out of the way\nG1 Y100 ;move Y forward, so the print is more accessible\nM84 ;steppers off\n\nM117 Print finished ;write Print finished\n;---------------------------------------\n;;; Jellybox End Script End ;;;\n;_______________________________________"
        }
    }
}