Cura/resources/variants/ultimaker2_extended_plus_0.4.inst.cfg

[general]
definition = ultimaker2_extended_plus
name = 0.4 mm
version = 4

[metadata]
hardware_type = nozzle
setting_version = 23
type = variant

[values]
machine_nozzle_size = 0.4
machine_nozzle_tip_outer_diameter = 1.05
speed_topbottom = =round(speed_print / 2.25, 1)
speed_wall = =round(speed_print / 1.25, 1)
speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)