Cura/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg

[general]
definition = strateo3d
name = Standard 1.2 Experimental
version = 4

[metadata]
hardware_type = nozzle
setting_version = 23
type = variant

[values]
layer_height = 0.6
layer_height_0 = 0.7
machine_nozzle_id = Standard 1.2 Experimental
machine_nozzle_size = 1.2
machine_nozzle_tip_outer_diameter = 3.0
prime_tower_enable = True
retract_at_layer_change = True
support_angle = 50
support_use_towers = True