Cura/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg

[general]
definition = ultimaker_methodx
name = Fast - Experimental
version = 4

[metadata]
is_experimental = True
material = ultimaker_asa_175
quality_type = draft
setting_version = 23
type = quality
variant = LABS
weight = -2

[values]
cool_fan_enabled = False
material_print_temperature_layer_0 = =default_material_print_temperature+5
raft_airgap = 0.3
raft_base_speed = 10
retract_at_layer_change = True
retraction_amount = 0.5
retraction_min_travel = 3.2
roofing_material_flow = 98.0
small_skin_width = 3.6
speed_prime_tower = 30.0
speed_print = 120.0
speed_roofing = 55
speed_topbottom = 55
speed_travel = 250.0
speed_wall_0 = 45
speed_wall_x = 65
support_angle = 50
support_bottom_density = 24
support_bottom_enable = False
support_bottom_line_width = 0.6
support_bottom_stair_step_height = 0
support_fan_enable = False
support_infill_rate = 12.0
support_interface_enable = True
support_interface_pattern = lines
support_line_width = 0.3
support_pattern = lines
support_roof_density = 97
support_roof_height = 1.015
support_roof_line_width = 0.25
support_use_towers = False
support_xy_distance = 0.2
support_xy_distance_overhang = 0.15
support_z_distance = 0.25