Cura/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg

[general]
definition = ultimaker3
name = Fast
version = 4

[metadata]
material = generic_petg
quality_type = draft
setting_version = 23
type = quality
variant = AA 0.4
weight = -2

[values]
material_print_temperature = =default_material_print_temperature + 5
retraction_combing = all
skin_overlap = 20
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)