| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566 |
- [general]
- definition = strateo3d
- name = D
- version = 4
- [metadata]
- material = emotiontech_copa
- quality_type = d
- setting_version = 23
- type = quality
- variant = Standard 0.8
- weight = 0
- [values]
- bridge_fan_speed = 80
- bridge_settings_enabled = True
- bridge_skin_density = 80
- bridge_skin_material_flow = 60
- bridge_skin_speed = 10
- bridge_wall_coast = 50
- bridge_wall_material_flow = 50
- bridge_wall_speed = 10
- cool_fan_enabled = True
- cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
- cool_fan_speed = 20
- cool_fan_speed_max = 80
- cool_lift_head = True
- cool_min_layer_time = 4
- cool_min_layer_time_fan_speed_max = 20
- cool_min_speed = 8
- layer_height_0 = =round(0.67*machine_nozzle_size, 2)
- line_width = =machine_nozzle_size/machine_nozzle_size*0.8
- material_final_print_temperature = =default_material_print_temperature
- material_flow = 93
- material_initial_print_temperature = =default_material_print_temperature
- material_print_temperature = =default_material_print_temperature
- material_print_temperature_layer_0 = =default_material_print_temperature + 5
- meshfix_maximum_deviation = 0.04
- meshfix_maximum_resolution = 0.5
- prime_tower_enable = True
- retraction_extra_prime_amount = 0.5
- retraction_hop = 2
- retraction_hop_enabled = True
- retraction_hop_only_when_collides = True
- retraction_min_travel = =2*line_width
- retraction_speed = 35
- skin_material_flow = 94
- skin_overlap = 5
- speed_layer_0 = =math.ceil(speed_print * 25/50)
- speed_print = 40
- speed_slowdown_layers = 2
- speed_topbottom = =math.ceil(speed_print * 35/50)
- speed_wall = =math.ceil(speed_print * 40/50)
- speed_wall_0 = =math.ceil(speed_wall * 30/40)
- support_angle = 45
- support_bottom_distance = =support_z_distance*0.5
- support_interface_density = 100
- support_offset = 1
- support_xy_distance = =line_width * 1.7
- support_xy_distance_overhang = =wall_line_width_0
- support_z_distance = =layer_height*2
- wall_0_wipe_dist = =machine_nozzle_size/2
- wall_line_count = 4
- wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
- wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
|
