Cura/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg

[general]
definition = ultimaker2_plus_connect
name = Normal
version = 4

[metadata]
material = generic_nylon
quality_type = draft
setting_version = 21
type = quality
variant = 0.4 mm
weight = -1

[values]
cool_fan_speed_min = =cool_fan_speed * 0.35
infill_overlap = =0 if infill_sparse_density > 80 else 5
infill_sparse_density = 20
layer_0_z_overlap = 0.22
raft_airgap = 0.57
retraction_prime_speed = =retraction_speed
speed_infill = =math.ceil(speed_print * 45 / 45)
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 20 / 45)
speed_travel = 150
speed_wall = =math.ceil(speed_print * 40 / 45)
speed_wall_0 = =math.ceil(speed_print * 30 / 45)
speed_wall_x = =math.ceil(speed_print * 40 / 45)
support_angle = 45
support_enable = True
support_z_distance = =layer_height * 2
top_bottom_thickness = 0.75