| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556 |
- {
- "version": 2,
- "name": "Kosher_Mirror",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Venkat Kamesh",
- "manufacturer": "Sri Vignan Technologies",
- "weight": 3,
- "file_formats": "text/x-gcode",
- "platform": "ultimaker3_platform.obj",
- "platform_texture": "koshertext.png",
- "platform_offset": [65, 0, 0],
- "has_material": true,
- "has_variants": true,
- "preferred_variant_name": "0.4 mm",
- "machine_extruder_trains":
- {
- "0": "kosher_mm_extruder"
- }
- },
- "overrides": {
- "machine_name": { "default_value": "Kosher_Mirror" },
- "machine_width": { "default_value": 75 },
- "machine_height": { "default_value": 300 },
- "machine_depth": { "default_value": 220 },
- "machine_heated_bed": { "default_value": true },
- "machine_acceleration": {"default_value": 3000},
- "machine_max_feedrate_x": { "value": 300 },
- "machine_max_feedrate_y": { "value": 300 },
- "machine_max_feedrate_z": { "value": 40 },
- "machine_max_feedrate_e": { "value": 150 },
- "machine_use_extruder_offset_to_offset_coords": {"default_value": false},
- "machine_center_is_zero": {"default_value": false},
- "gantry_height": {"value": "48"},
- "line_width": {"value": "machine_nozzle_size"},
- "speed_travel": {"maximum_value": "300", "value": "200"},
- "optimize_wall_printing_order": { "value": "True" },
- "material_diameter": { "default_value": 1.75},
- "retraction_amount": {"default_value": 6.5},
- "retraction_speed": { "default_value": 30},
-
- "adhesion_type": { "default_value": "skirt" },
- "start_layers_at_same_position": { "enabled": true, "value": false },
- "layer_start_x": { "enabled": "start_layers_at_same_position", "value": "machine_width/2"},
- "layer_start_y": { "enabled": "start_layers_at_same_position","value": "machine_depth"},
- "ironing_enabled":{"label": "Enable Ironing",
- "description": "Go over the top surface one additional time, but this time extruding very little material. This is meant to melt the plastic on top further, creating a smoother surface. The pressure in the nozzle chamber is kept high so that the creases in the surface are filled with material.",
- "type": "bool", "default_value": true, "limit_to_extruder": "top_bottom_extruder_nr", "settable_per_mesh": true },
- "machine_gcode_flavor": { "default_value": "Marlin"},
- "machine_start_gcode": {"default_value": "M605 S0\nT0\nM605 S2 R0 X220\nM605 S3 X220\nG21\nG90\nM82\nM107\nM104 S{material_print_temperature};\nM105\nM109 S{material_print_temperature};\nG28\nG1 X-50 F9000\nG92 E0\nG1 E16 F210\nG92 E0\n" },
- "machine_end_gcode": {"default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0\nM140 S0\nM117\nM605 S0\nG28 X0 Y0\nM605 S1\nG28 X\nM84"},
- "machine_extruder_count": { "default_value": 1 }
- }
- }
|
