Cura/resources/variants/ultimaker2_plus_connect_0.8.inst.cfg

[general]
definition = ultimaker2_plus_connect
name = 0.8 mm
version = 4

[metadata]
hardware_type = nozzle
setting_version = 21
type = variant

[values]
coasting_volume = 3.22
machine_nozzle_size = 0.8
machine_nozzle_tip_outer_diameter = 1.35
retraction_prime_speed = =retraction_speed
retraction_speed = 25
speed_topbottom = =round(speed_print / 2, 1)
speed_wall = =round(speed_print * 3 / 4, 1)
speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)