Cura/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg

[general]
version = 4
name = Fine - Experimental
definition = ultimaker3

[metadata]
setting_version = 20
type = quality
quality_type = normal
weight = 0
material = generic_pp
variant = AA 0.25
is_experimental = True

[values]
brim_width = 10
cool_fan_speed_max = 100
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 2.5
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
machine_min_cool_heat_time_window = 15
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature - 15
material_print_temperature_layer_0 = =material_print_temperature + 3
multiple_mesh_overlap = 0
prime_tower_enable = False
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_count_max = 45
retraction_extra_prime_amount = 0.2
retraction_extrusion_window = 6.5
retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 13
speed_layer_0 = =math.ceil(speed_print * 15 / 25)
speed_print = 25
speed_travel = 300
speed_travel_layer_0 = 50
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 1
travel_avoid_distance = 3
wall_0_inset = 0