Cura/resources/quality/deltacomb/PETG/deltacomb_FBE0.60_PETG_E.inst.cfg

[general]
definition = deltacomb_base
name = E
version = 4

[metadata]
material = generic_petg
quality_type = D030
setting_version = 22
type = quality
variant = FBE 0.60mm

[values]
coasting_enable = True
coasting_min_volume = 3
coasting_speed = 70
coasting_volume = 0.256
cool_fan_full_at_height = 1
cool_fan_speed = 60
cool_fan_speed_max = 100
cool_fan_speed_min = 60
infill_enable_travel_optimization = True
initial_layer_line_width_factor = 120
material_bed_temperature = 60
material_bed_temperature_layer_0 = 45
material_flow = 95
material_print_temperature = 225
retraction_amount = 5
retraction_combing_max_distance = 5
speed_infill = =speed_print
speed_print = 40
speed_roofing = =speed_print * 0.7
speed_wall_0 = =speed_print * 0.7
travel_avoid_other_parts = False