gmax15plus_global_dual_thin.inst.cfg 1.4 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859
  1. [general]
  2. definition = gmax15plus_dual
  3. name = gMax 1.5+ Dual Thin Layers
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = high
  8. setting_version = 22
  9. type = quality
  10. weight = 1
  11. [values]
  12. acceleration_enabled = True
  13. acceleration_print = 400
  14. acceleration_travel = 700
  15. adhesion_type = skirt
  16. bottom_layers = 2
  17. coasting_enable = False
  18. coasting_volume = 0.0625
  19. cool_fan_speed = 70
  20. cool_fan_speed_max = 85
  21. infill_before_walls = False
  22. infill_overlap = 20
  23. infill_pattern = grid
  24. layer_height = 0.16
  25. layer_height_0 = 0.2
  26. material_flow = 98
  27. material_standby_temperature = =material_print_temperature - 10
  28. ooze_shield_angle = 20
  29. ooze_shield_dist = 4
  30. ooze_shield_enabled = True
  31. prime_tower_enable = False
  32. retraction_amount = 0.75
  33. retraction_combing = off
  34. retraction_speed = 70
  35. skin_overlap = 10
  36. skirt_gap = 2
  37. speed_infill = =math.ceil(speed_print * 0.85)
  38. speed_layer_0 = =math.ceil(speed_print * 0.4)
  39. speed_print = 40
  40. speed_slowdown_layers = 1
  41. speed_topbottom = =math.ceil(speed_print * 0.75)
  42. speed_wall = =math.ceil(speed_print * 0.5)
  43. speed_wall_x = =math.ceil(speed_print * 0.7)
  44. support_interface_enable = True
  45. support_interface_pattern = lines
  46. support_join_distance = 10
  47. support_use_towers = False
  48. support_xy_distance = 1.5
  49. support_z_distance = 0.2
  50. switch_extruder_retraction_amount = 6
  51. switch_extruder_retraction_speeds = 60
  52. top_bottom_pattern = lines
  53. top_layers = 4
  54. top_thickness = 1
  55. wall_line_count = 2
  56. z_seam_corner = z_seam_corner_none