um3_aa0.4_BAM_Fast_Print.inst.cfg 1.4 KB

123456789101112131415161718192021222324252627282930313233343536373839
  1. [general]
  2. version = 4
  3. name = Normal
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 19
  7. type = quality
  8. quality_type = fast
  9. weight = -1
  10. material = generic_bam
  11. variant = AA 0.4
  12. [values]
  13. brim_replaces_support = False
  14. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  15. cool_fan_speed_max = =cool_fan_speed
  16. machine_nozzle_cool_down_speed = 0.75
  17. machine_nozzle_heat_up_speed = 1.6
  18. # prime_tower_enable: see CURA-4248
  19. prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
  20. speed_print = 80
  21. speed_layer_0 = =math.ceil(speed_print * 20 / 80)
  22. speed_topbottom = =math.ceil(speed_print * 30 / 80)
  23. speed_wall = =math.ceil(speed_print * 40 / 80)
  24. speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
  25. top_bottom_thickness = 1
  26. wall_thickness = 1
  27. support_brim_enable = True
  28. support_interface_enable = True
  29. support_interface_density = =min(extruderValues('material_surface_energy'))
  30. support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
  31. support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
  32. support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
  33. support_angle = 45
  34. support_join_distance = 5
  35. support_offset = 2
  36. support_pattern = triangles
  37. support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10