anycubic_chiron_high.inst.cfg 1.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061
  1. [general]
  2. version = 4
  3. name = High
  4. definition = anycubic_chiron
  5. [metadata]
  6. setting_version = 19
  7. type = quality
  8. quality_type = high
  9. weight = 1
  10. global_quality = True
  11. [values]
  12. acceleration_enabled = True
  13. acceleration_print = 1800
  14. acceleration_travel = 3000
  15. adhesion_type = skirt
  16. brim_width = 4.0
  17. cool_fan_full_at_height = 0.5
  18. cool_fan_speed = 100
  19. cool_fan_speed_0 = 100
  20. infill_overlap = 15
  21. infill_pattern = zigzag
  22. infill_sparse_density = 25
  23. initial_layer_line_width_factor = 140
  24. jerk_enabled = True
  25. jerk_print = 8
  26. jerk_travel = 10
  27. layer_height = 0.1
  28. layer_height_0 = 0.1
  29. material_bed_temperature = 60
  30. material_diameter = 1.75
  31. material_print_temperature = 200
  32. material_print_temperature_layer_0 = 0
  33. retract_at_layer_change = False
  34. retraction_amount = 6
  35. retraction_hop = 0.075
  36. retraction_hop_enabled = True
  37. retraction_hop_only_when_collides = True
  38. retraction_min_travel = 1.5
  39. retraction_speed = 40
  40. skirt_brim_speed = 40
  41. skirt_gap = 5
  42. skirt_line_count = 3
  43. speed_infill = =speed_print
  44. speed_print = 50
  45. speed_support = 30
  46. speed_topbottom = =math.ceil(speed_print * 20 / 50)
  47. speed_travel = 50
  48. speed_wall = =speed_print
  49. speed_wall_x = =speed_print
  50. support_angle = 60
  51. support_enable = True
  52. support_interface_enable = True
  53. support_pattern = triangles
  54. support_roof_enable = True
  55. support_type = everywhere
  56. support_use_towers = False
  57. support_xy_distance = 0.7
  58. top_bottom_thickness = 1.2
  59. wall_thickness = 1.2