Cura/resources/variants/strateo3d_standard_06.inst.cfg

[general]
name = Standard 0.6
version = 4
definition = strateo3d

[metadata]
setting_version = 19
type = variant
hardware_type = nozzle

[values]
machine_nozzle_id = Standard 0.6
machine_nozzle_size = 0.6
machine_nozzle_tip_outer_diameter = 1.5
layer_height = 0.3
layer_height_0 = 0.4
prime_tower_enable = True
retract_at_layer_change = False
support_angle = 55
support_use_towers = True