Cura/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg

[general]
version = 4
name = Extra Fast
definition = ultimaker3

[metadata]
setting_version = 19
type = quality
quality_type = verydraft
weight = -3
material = generic_tough_pla
variant = AA 0.8

[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
infill_line_width = =round(line_width * 0.75 / 0.75, 2)
infill_pattern = cubic
layer_height_0 = 0.4
line_width = =machine_nozzle_size * 0.9375
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
material_print_temperature = =default_material_print_temperature + 5
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
prime_tower_enable = False
retract_at_layer_change = False
speed_infill = =math.ceil(speed_print * 30 / 35)
speed_topbottom = =math.ceil(speed_print * 20 / 35)
speed_wall = =math.ceil(speed_print * 25/ 35)
speed_wall_0 = =math.ceil(speed_print * 20 / 35)
support_angle = 70
support_line_width = =line_width * 0.75
support_pattern = ='triangles'
support_xy_distance = =wall_line_width_0 * 1.5
top_bottom_thickness = =layer_height * 4
wall_line_width = =round(line_width * 0.75 / 0.75, 2)
wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
wall_thickness = =wall_line_width_0 + wall_line_width_x