Cura/resources/definitions/bibo2_dual.def.json

{
    "version": 2,
    "name": "Bibo 2 dual",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "unknown",
        "manufacturer": "BIBO",
        "file_formats": "text/x-gcode",
        "has_materials": true,
        "machine_extruder_trains": {
            "0": "bibo2_dual_extruder_0",
            "1": "bibo2_dual_extruder_1"
        },
        "first_start_actions": [
            "MachineSettingsAction"
        ]
    },
    "overrides": {
        "machine_name": {
            "default_value": "BIBO2 dual"
        },
        "machine_width": {
            "default_value": 214
        },
        "machine_height": {
            "default_value": 160
        },
        "machine_depth": {
            "default_value": 186
        },
        "machine_center_is_zero": {
            "default_value": true
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "machine_nozzle_heat_up_speed": {
            "default_value": 2
        },
        "machine_nozzle_cool_down_speed": {
            "default_value": 2
        },
        "machine_head_with_fans_polygon": {
            "default_value": [
                [
                    -68.18,
                    64.63
                ],
                [
                    -68.18,
                    -47.38
                ],
                [
                    35.18,
                    64.63
                ],
                [
                    35.18,
                    -47.38
                ]
            ]
        },
        "gantry_height": {
            "value": "12"
        },
        "machine_use_extruder_offset_to_offset_coords": {
            "default_value": true
        },
        "machine_gcode_flavor": {
            "default_value": "RepRap (Marlin/Sprinter)"
        },
        "machine_start_gcode": {
            "default_value": "M104 T0 165\nM104 T1 165\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z2.0 F400 ;move the platform down 2mm\nT0\nG92 E0\nG28\nG1 Y0 F1200 E0\nG92 E0\nT{initial_extruder_nr}\nM117 BIBO Printing..."
        },
        "machine_end_gcode": {
            "default_value": ";End GCode\nM104 T0 S0                     ;extruder heater off\nM104 T1 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91\nG1 Z1 F100                                        ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-2 X-20 Y-20 F300 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning"
        },
        "speed_print": {
            "default_value": 40
        },
        "machine_extruder_count": {
            "default_value": 2
        },
        "prime_tower_position_x": {
            "value": "50"
        },
        "prime_tower_position_y": {
            "value": "50"
        }
    }
}