Cura/resources/definitions/atmat_signal_pro_base.def.json

{
    "name": "Signal Pro Base",
    "version": 2,
    "inherits": "fdmprinter",
    "metadata": 
    {
        "visible": false,
        "author": "ATMAT",
        "manufacturer": "ATMAT sp. z o.o.",
        "file_formats": "text/x-gcode",
        "preferred_quality_type": "fast",
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "variants_name": "Nozzle",
        "preferred_variant_name": "V6 0.40mm",
        "machine_extruder_trains":
        {
            "0": "atmat_signal_pro_extruder_left",
            "1": "atmat_signal_pro_extruder_right"
        },
        "preferred_material": "generic_pla_175",
		"supports_usb_connection": false,
        "supports_network_connection": false,
        "exclude_materials": [
            "ultimaker_abs_black",
            "ultimaker_abs_blue",
            "ultimaker_abs_green",
            "ultimaker_abs_grey",
            "ultimaker_abs_orange",
            "ultimaker_abs_pearl-gold",
            "ultimaker_abs_red",
            "ultimaker_abs_silver-metallic",
            "ultimaker_abs_white",
            "ultimaker_abs_yellow",
            "ultimaker_bam",
            "ultimaker_cpe_black",
            "ultimaker_cpe_blue",
            "ultimaker_cpe_dark-grey",
            "ultimaker_cpe_green",
            "ultimaker_cpe_light-grey",
            "ultimaker_cpe_plus_black",
            "ultimaker_cpe_plus_transparent",
            "ultimaker_cpe_plus_white",
            "ultimaker_cpe_red",
            "ultimaker_cpe_transparent",
            "ultimaker_cpe_white",
            "ultimaker_cpe_yellow",
            "ultimaker_nylon_black",
            "ultimaker_nylon_transparent",
            "ultimaker_pc_black",
            "ultimaker_pc_transparent",
            "ultimaker_pc_white",
            "ultimaker_pla_black",
            "ultimaker_pla_blue",
            "ultimaker_pla_green",
            "ultimaker_pla_magenta",
            "ultimaker_pla_orange",
            "ultimaker_pla_pearl-white",
            "ultimaker_pla_red",
            "ultimaker_pla_silver-metallic",
            "ultimaker_pla_transparent",
            "ultimaker_pla_white",
            "ultimaker_pla_yellow",
            "ultimaker_pp_transparent",
            "ultimaker_pva",
            "ultimaker_tough_pla_black",
            "ultimaker_tough_pla_green",
            "ultimaker_tough_pla_red",
            "ultimaker_tough_pla_white",
            "ultimaker_tpu_black",
            "ultimaker_tpu_blue",
            "ultimaker_tpu_red",
            "ultimaker_tpu_white",
            "chromatik_pla",
            "dsm_arnitel2045_175",
            "dsm_novamid1070_175",
            "emotiontech_abs",
            "emotiontech_petg",
            "emotiontech_pla",
            "emotiontech_pva-m",
            "emotiontech_pva-oks",
            "emotiontech_pva-s",
            "emotiontech_tpu98a",
            "emotiontech_asax",
            "emotiontech_hips",
            "fiberlogy_hd_pla",
            "fabtotum_abs",
            "fabtotum_nylon",
            "fabtotum_pla",
            "fabtotum_tpu",
            "filo3d_pla",
            "filo3d_pla_green",
            "filo3d_pla_red",
            "generic_abs",
            "generic_bam",
            "generic_cffcpe",
            "generic_cffpa",
            "generic_cpe",
            "generic_cpe_plus",
            "generic_gffcpe",
            "generic_gffpa",
            "generic_hips",
            "generic_nylon",
            "generic_pc",
            "generic_petg",
            "generic_pla",
            "generic_pp",
            "generic_pva",
            "generic_tough_pla",
            "generic_tpu",
            "generic_cpe_175",
            "imade3d_petg_175",
            "imade3d_pla_175",
            "innofill_innoflex60_175",
            "leapfrog_abs_natural",
            "leapfrog_epla_natural",
            "leapfrog_pva_natural",
            "octofiber_pla",
            "polyflex_pla",
            "polymax_pla",
            "polyplus_pla",
            "polywood_pla",
            "structur3d_dap100silicone",
            "tizyx_abs",
            "tizyx_flex",
            "tizyx_petg",
            "tizyx_pla",
            "tizyx_pla_bois",
            "tizyx_pva",
            "ultimaker_abs_black",
            "ultimaker_abs_blue",
            "ultimaker_abs_green",
            "ultimaker_abs_grey",
            "ultimaker_abs_orange",
            "ultimaker_abs_pearl-gold",
            "ultimaker_abs_red",
            "ultimaker_abs_silver-metallic",
            "ultimaker_abs_white",
            "ultimaker_abs_yellow",
            "ultimaker_bam",
            "ultimaker_cpe_black",
            "ultimaker_cpe_blue",
            "ultimaker_cpe_dark-grey",
            "ultimaker_cpe_green",
            "ultimaker_cpe_light-grey",
            "ultimaker_cpe_plus_black",
            "ultimaker_cpe_plus_transparent",
            "ultimaker_cpe_plus_white",
            "ultimaker_cpe_red",
            "ultimaker_cpe_transparent",
            "ultimaker_cpe_white",
            "ultimaker_cpe_yellow",
            "ultimaker_nylon_black",
            "ultimaker_nylon_transparent",
            "ultimaker_pc_black",
            "ultimaker_pc_transparent",
            "ultimaker_pc_white",
            "ultimaker_pla_black",
            "ultimaker_pla_blue",
            "ultimaker_pla_green",
            "ultimaker_pla_magenta",
            "ultimaker_pla_orange",
            "ultimaker_pla_pearl-white",
            "ultimaker_pla_red",
            "ultimaker_pla_silver-metallic",
            "ultimaker_pla_transparent",
            "ultimaker_pla_white",
            "ultimaker_pla_yellow",
            "ultimaker_pp_transparent",
            "ultimaker_pva",
            "ultimaker_tough_pla_black",
            "ultimaker_tough_pla_green",
            "ultimaker_tough_pla_red",
            "ultimaker_tough_pla_white",
            "ultimaker_tpu_black",
            "ultimaker_tpu_blue",
            "ultimaker_tpu_red",
            "ultimaker_tpu_white",
            "verbatim_bvoh_175",
            "Vertex_Delta_ABS",
            "Vertex_Delta_PET",
            "Vertex_Delta_PLA",
            "Vertex_Delta_PLA_Glitter",
            "Vertex_Delta_PLA_Mat",
            "Vertex_Delta_PLA_Satin",
            "Vertex_Delta_PLA_Wood",
            "Vertex_Delta_TPU",
            "zyyx_pro_flex",
            "zyyx_pro_pla"

        ]
    },
    "overrides":
    {
        "machine_name":                                 { "default_value": "Signal Pro" },
        "machine_width":                                { "default_value": 300 },
        "machine_depth":                                { "default_value": 300 },
        "machine_height":                               { "default_value": 300 },
        "gantry_height":                                { "value": 30 },
		"machine_extruder_count": 						{ "default_value": 2 },
        "machine_heated_bed":                           { "default_value": true },
		"machine_heated_build_volume": 					{ "default_value": true },
        "build_volume_temperature": 					{ "maximum_value_warning": 45 },
        "material_print_temperature":                   { "maximum_value_warning": 295 },
        "material_bed_temperature":                     { "maximum_value_warning": 140 },
        "machine_max_acceleration_x":                   { "default_value": 1500 },
        "machine_max_acceleration_y":                   { "default_value": 1500 },
        "machine_max_acceleration_z":                   { "default_value": 250 },
        "machine_acceleration":                         { "default_value": 1500 },
        "machine_max_jerk_xy":                          { "default_value": 15 },
        "machine_max_jerk_z":                           { "default_value": 1 },
        "machine_max_jerk_e":                           { "default_value": 15 },
        "machine_head_with_fans_polygon":               { "default_value": [ [-35, 65], [-35, -50], [35, -50], [35, 65] ] },
        "machine_max_feedrate_z":                       { "default_value": 10 },
        "machine_max_feedrate_e":                       { "default_value": 120 },
        "machine_gcode_flavor":                         { "default_value": "Marlin" },
        "machine_start_gcode":                          { "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nG28 ; home all without mesh bed level\nM420 S1\nG92 E0.0 ; reset extruder distance position\nG1 Z0.25\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position" },
        "machine_end_gcode":                            { "default_value": "M104 T0 S0                     ;extruder heater off\nM104 T1 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off\nG91\nG1 Z1 F420                                        ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 F300 ;move Z up a bit and retract filament even more\nG90                         ;absolute positioning\nG1 X0 Y300 F6000                              ;move the head out of the way\nM84                         ;steppers off" },
        "adhesion_type":                                { "default_value": "skirt" },
        "skirt_brim_minimal_length":                    { "value": "550" },
		"retraction_amount": 							{ "value": "1" },
        "retraction_speed":                             { "value": "50", "maximum_value_warning": "130" },
        "retraction_retract_speed":                     { "value": "retraction_speed", "maximum_value_warning": "130" },
        "retraction_prime_speed":                       { "value": "math.ceil(retraction_speed * 0.4)", "maximum_value_warning": "130" },
        "retraction_hop_enabled":                       { "value": "True" },
        "retraction_hop":                               { "value": "0.5" },
        "retraction_combing":                           { "value": "'noskin'" },
        "retraction_combing_max_distance":              { "value": "10" },
        "travel_avoid_other_parts":                     { "value": "True" },
        "travel_avoid_supports":                        { "value": "True" },
        "speed_travel":                                 { "maximum_value": "150", "value": "150", "maximum_value_warning": "151" },
        "speed_travel_layer_0":                         { "value": "math.ceil(speed_travel * 0.4)" },
        "speed_layer_0":                                { "value": "math.ceil(speed_print * 0.25)" },
        "speed_wall":                                   { "value": "math.ceil(speed_print * 0.50)" },
        "speed_wall_0":                                 { "value": "math.ceil(speed_print * 0.50)" },
        "speed_wall_x":                                 { "value": "math.ceil(speed_print * 0.75)" },
        "speed_topbottom":                              { "value": "math.ceil(speed_print * 0.45)" },
        "speed_roofing":                                { "value": "math.ceil(speed_print * 0.45)" },
        "speed_slowdown_layers":                        { "value": "2" },
        "roofing_layer_count":                          { "value": "1" },
        "optimize_wall_printing_order":                 { "value": "True" },
        "infill_enable_travel_optimization":            { "value": "True" },
        "minimum_polygon_circumference":                { "value": "0.2" },
        "wall_overhang_angle":                          { "value": "75" },
        "wall_overhang_speed_factor":                   { "value": "50" },
        "bridge_settings_enabled":                      { "value": "True" },
        "bridge_wall_coast":                            { "value": "10" },
        "bridge_fan_speed":                             { "value": "100" },
        "bridge_fan_speed_2":                           { "resolve": "max(cool_fan_speed, 50)" },
        "bridge_fan_speed_3":                           { "resolve": "max(cool_fan_speed, 20)" },
        "alternate_extra_perimeter":                    { "value": "True" },
        "cool_min_layer_time_fan_speed_max":            { "value": "20" },
        "cool_min_layer_time":                          { "value": "15" },
        "cool_fan_speed_min":                           { "value": "cool_fan_speed" },
        "cool_fan_full_at_height":                      { "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)" },
        "cool_fan_full_layer":                          { "value": "4" },
        "layer_height_0":                               { "resolve": "max(0.2, min(extruderValues('layer_height')))" },
        "line_width":                                   { "value": "machine_nozzle_size * 1.125" },
        "wall_line_width":                              { "value": "machine_nozzle_size" },
        "fill_perimeter_gaps":                          { "default_value": "everywhere" },
        "fill_outline_gaps":                            { "value": "True" },
        "meshfix_maximum_resolution":                   { "value": "0.01" },
        "meshfix_maximum_deviation":                    { "value": "layer_height / 2" },
        "infill_before_walls":                          { "value": "False" },
        "zig_zaggify_infill":                           { "value": "True" },
        "min_infill_area":                              { "value": "5.0" },
        "acceleration_enabled": 						{ "value": "True" },
        "acceleration_layer_0": 						{ "value": "250" },
        "acceleration_prime_tower": 					{ "value": "1000" },
        "acceleration_print": 							{ "value": "1000" },
		"acceleration_travel": 							{ "value": "1000" },
        "acceleration_support": 						{ "value": "1000" },
        "acceleration_support_interface": 				{ "value": "750" },
        "acceleration_topbottom": 						{ "value": "750" },
        "acceleration_wall": 							{ "value": "750" },
        "acceleration_wall_0": 							{ "value": "500" },
        "jerk_enabled":                                 { "value": "True" },
        "jerk_layer_0": 								{ "value": "5" },
        "jerk_prime_tower": 							{ "value": "jerk_print" },
        "jerk_print": 									{ "value": "10" },
        "jerk_support": 								{ "value": "jerk_print" },
        "jerk_support_interface": 						{ "value": "jerk_print" },
        "jerk_topbottom": 								{ "value": "jerk_print" },
        "jerk_wall": 									{ "value": "jerk_print" },
        "jerk_wall_0": 									{ "value": "jerk_print" },
		"jerk_travel":									{ "value": "jerk_layer_0" },
		"jerk_travel_layer_0":						    { "value": "jerk_layer_0" },
		"prime_tower_position_x": 						{ "value": "270" },
        "prime_tower_position_y": 						{ "value": "270" },
		"extruder_prime_pos_abs": 						{ "value": "True" },
		"switch_extruder_prime_speed": 					{ "value": "15" },
        "switch_extruder_retraction_amount": 			{ "value": "2" },
        "support_xy_distance":                          { "value": "wall_line_width_0 * 2.5" },
        "support_xy_distance_overhang":                 { "value": "wall_line_width_0" },
        "support_angle":                                { "value": "60" },
        "support_bottom_distance":                      { "value": "support_z_distance / 2" },
        "support_pattern":                              { "default_value": "zigzag" },
        "support_top_distance":                         { "value": "support_z_distance" },
        "support_use_towers":                           { "value": "True" },
        "support_z_distance":                           { "value": "layer_height" },
        "support_interface_enable":                     { "value": "True" },
        "support_interface_height":                     { "value": "1" },
        "support_interface_skip_height":                { "value": "layer_height" },
        "support_bottom_enable":                        { "value": "False" },
        "support_join_distance":                        { "value": "1" },
        "support_offset":                               { "value": "1.5" },
        "support_infill_rate":                          { "value": "20" },
        "support_brim_enable":                          { "value": "True" },
        "prime_tower_enable":                           { "value": "True" }
    }
}