Cura/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg

[general]
definition = ultimaker3
name = Fine
version = 4

[metadata]
material = generic_bam
quality_type = normal
setting_version = 21
type = quality
variant = AA 0.4
weight = 0

[values]
brim_replaces_support = False
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
skin_overlap = 10
support_angle = 45
support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
support_brim_enable = True
support_infill_sparse_thickness = =2*layer_height
support_interface_density = =min(extruderValues('material_surface_energy'))
support_interface_enable = True
support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
top_bottom_thickness = 1