eryone_er20.def.json 5.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110
  1. {
  2. "version": 2,
  3. "name": "Eryone ER20",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Eryone3d",
  9. "manufacturer": "Eryone",
  10. "file_formats": "text/x-gcode",
  11. "platform": "eryone_er20_plateform.stl",
  12. "has_machine_quality": true,
  13. "machine_extruder_trains": { "0": "eryone_er20_extruder_0" },
  14. "preferred_quality_type": "high"
  15. },
  16. "overrides":
  17. {
  18. "acceleration_enabled": { "value": true },
  19. "acceleration_travel": { "value": 1800 },
  20. "adhesion_type": { "value": "'brim'" },
  21. "bottom_layers": { "value": "4" },
  22. "bottom_thickness": { "value": "layer_height * 4" },
  23. "brim_width": { "value": 5 },
  24. "cool_fan_full_at_height": { "value": 0.5 },
  25. "cool_fan_speed": { "value": 100 },
  26. "cool_fan_speed_0": { "value": 100 },
  27. "default_material_bed_temperature": { "value": 60 },
  28. "default_material_print_temperature": { "value": 205 },
  29. "gantry_height": { "value": "0" },
  30. "infill_before_walls": { "value": false },
  31. "infill_overlap":
  32. {
  33. "maximum_value_warning": 100,
  34. "minimum_value_warning": -50,
  35. "value": "25 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0"
  36. },
  37. "infill_pattern": { "value": "'grid'" },
  38. "infill_sparse_density": { "value": 20 },
  39. "initial_layer_line_width_factor": { "value": 105 },
  40. "machine_center_is_zero": { "default_value": false },
  41. "machine_depth": { "default_value": 220 },
  42. "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X230 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n" },
  43. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  44. "machine_head_with_fans_polygon":
  45. {
  46. "default_value": [
  47. [-10, -10],
  48. [-10, 10],
  49. [10, 10],
  50. [10, -10]
  51. ]
  52. },
  53. "machine_heated_bed": { "default_value": true },
  54. "machine_height": { "default_value": 200 },
  55. "machine_name": { "default_value": "Eryone ER20" },
  56. "machine_start_gcode": { "default_value": "G21 ;Metric values\nG90 ;Absolute positioning\nM82 ;Set extruder to absolute mode\nM107 ;Start with the fan off\nG28 ;Homing the hotend\nG29 ;Auto bed leveling detecting\nG92 E0 ;Reset the extruded length\nG1 F200 E3 ;Extrude 3mm of filament\nG92 E0 ;Reset the extruded length again\nG1 Y-3 F1200 ;Move y axis to prime\nG1 X150 F6000 ;Move x axis to prime\nG1 Z0.2 F720 ;Move z axis to prime\nG1 X80.0 E8.0 F900 ;Prime line\nG1 X20.0 E10.0 F700 ;Prime line\nG92 E0 ;Reset the extruded length\nG5 ;Enable resume from power failure\nM117 Printing...\n" },
  57. "machine_width": { "default_value": 250 },
  58. "material_bed_temperature_layer_0": { "value": 65 },
  59. "material_final_print_temperature": { "value": 205 },
  60. "material_initial_print_temperature": { "value": 205 },
  61. "material_print_temperature_layer_0": { "value": 215 },
  62. "optimize_wall_printing_order": { "default_value": true },
  63. "retract_at_layer_change": { "value": true },
  64. "retraction_amount": { "default_value": 4 },
  65. "retraction_combing": { "value": "'noskin'" },
  66. "retraction_hop": { "value": 0.075 },
  67. "retraction_hop_enabled": { "value": false },
  68. "retraction_hop_only_when_collides": { "value": true },
  69. "retraction_min_travel": { "value": 1.5 },
  70. "retraction_prime_speed":
  71. {
  72. "maximum_value_warning": 130,
  73. "value": "math.ceil(retraction_speed * 0.4)"
  74. },
  75. "retraction_retract_speed": { "maximum_value_warning": 130 },
  76. "retraction_speed":
  77. {
  78. "default_value": 85,
  79. "maximum_value_warning": 100
  80. },
  81. "skin_overlap": { "value": 10 },
  82. "skirt_brim_speed": { "value": 40 },
  83. "skirt_gap": { "value": 5 },
  84. "skirt_line_count": { "value": 3 },
  85. "smooth_spiralized_contours": { "value": false },
  86. "speed_layer_0": { "value": "20" },
  87. "speed_topbottom": { "value": "math.ceil(speed_print * 20 / 50)" },
  88. "speed_travel": { "value": "150" },
  89. "speed_wall": { "value": "speed_print" },
  90. "speed_wall_0": { "value": "math.ceil(speed_print * 30 / 50)" },
  91. "speed_wall_x": { "value": "speed_print" },
  92. "support_angle": { "value": 50 },
  93. "support_enable": { "default_value": false },
  94. "support_interface_enable": { "value": true },
  95. "support_pattern": { "value": "'triangles'" },
  96. "support_roof_enable": { "value": true },
  97. "support_type": { "value": "'everywhere'" },
  98. "support_use_towers": { "value": false },
  99. "support_xy_distance": { "value": 0.7 },
  100. "support_xy_distance_overhang": { "value": 0.2 },
  101. "support_z_distance": { "value": 0.3 },
  102. "top_layers": { "value": "5" },
  103. "top_thickness": { "value": "layer_height * 5" },
  104. "travel_retract_before_outer_wall": { "value": true },
  105. "wall_line_count": { "value": 3 },
  106. "wall_thickness": { "value": "1.2" },
  107. "z_seam_corner": { "value": "'z_seam_corner_inner'" },
  108. "z_seam_type": { "value": "'shortest'" }
  109. }
  110. }