easyarts_ares.def.json 1.9 KB

123456789101112131415161718192021222324252627282930
  1. {
  2. "version": 2,
  3. "name": "EasyArts Ares",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "nliaudat",
  9. "manufacturer": "EasyArts",
  10. "file_formats": "text/x-gcode",
  11. "machine_extruder_trains": { "0": "easyarts_ares_extruder_0" }
  12. },
  13. "overrides":
  14. {
  15. "layer_height": { "default_value": 0.2 },
  16. "layer_height_0": { "default_value": 0.2 },
  17. "machine_center_is_zero": { "default_value": true },
  18. "machine_depth": { "default_value": 180 },
  19. "machine_end_gcode": { "default_value": "; -- START GCODE --\nG28 ; Home all axes\nM104 S0 ;extruder heater off\n;M140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84 ;steppers off\nG90 ;absolute positioning\n; -- end of START GCODE --" },
  20. "machine_gcode_flavor": { "default_value": "RepRap" },
  21. "machine_heated_bed": { "default_value": false },
  22. "machine_height": { "default_value": 200 },
  23. "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\n; -- end of START GCODE --" },
  24. "machine_width": { "default_value": 180 },
  25. "speed_print": { "default_value": 75 },
  26. "support_enable": { "default_value": true },
  27. "top_bottom_thickness": { "default_value": 1 },
  28. "wall_thickness": { "value": "1" }
  29. }
  30. }