| 12345678910111213141516171819202122232425262728293031323334353637 |
- {
- "version": 2,
- "name": "Z-Bolt Plus",
- "inherits": "fdmprinter",
- "metadata":
- {
- "visible": true,
- "author": "Z-Bolt",
- "manufacturer": "Z-Bolt Co.",
- "file_formats": "text/x-gcode",
- "platform": "z-bolt_plus_platform.3mf",
- "machine_extruder_trains": { "0": "z-bolt_extruder_0" }
- },
- "overrides":
- {
- "gantry_height": { "value": "55" },
- "machine_center_is_zero": { "default_value": false },
- "machine_depth": { "default_value": 200 },
- "machine_end_gcode": { "default_value": "'M104 S0 ;extruder heater off' + ('\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 Z0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning'" },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_head_with_fans_polygon":
- {
- "default_value": [
- [-75, 35],
- [-75, -18],
- [18, 35],
- [18, -18]
- ]
- },
- "machine_heated_bed": { "default_value": true },
- "machine_height": { "default_value": 335 },
- "machine_name": { "default_value": "Z-Bolt Plus" },
- "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
- "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
- "machine_width": { "default_value": 300 }
- }
- }
|
