Cura/resources/definitions/blv_mgn_cube_base.def.json

{
    "version": 2,
    "name": "BLV MGN Cube Base",
    "inherits": "anet3d",
    "metadata":
    {
        "visible": false,
        "author": "wolfgangmauer",
        "manufacturer": "BLV",
        "file_formats": "text/x-gcode",
        "first_start_actions": [ "MachineSettingsAction" ],
        "has_machine_quality": false,
        "has_materials": true,
        "has_variants": false,
        "machine_extruder_trains": { "0": "blv_mgn_cube_extruder_0" },
        "preferred_material": "generic_pla",
        "preferred_quality_type": "normal",
        "preferred_variant_name": "0.4mm Nozzle"
    },
    "overrides":
    {
        "acceleration_enabled": { "value": false },
        "adhesion_type": { "value": "'none'" },
        "bottom_layers": { "value": 3 },
        "bridge_fan_speed": { "default_value": 100 },
        "bridge_fan_speed_2": { "resolve": "max(cool_fan_speed, 50)" },
        "bridge_fan_speed_3": { "resolve": "max(cool_fan_speed, 20)" },
        "bridge_settings_enabled": { "default_value": true },
        "bridge_wall_coast": { "default_value": 10 },
        "brim_width": { "default_value": 5 },
        "cool_fan_full_at_height": { "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)" },
        "cool_fan_full_layer": { "value": 4 },
        "cool_fan_speed_min": { "value": "cool_fan_speed" },
        "cool_min_layer_time": { "value": 15 },
        "cool_min_layer_time_fan_speed_max": { "default_value": 20 },
        "fill_outline_gaps": { "value": true },
        "infill_before_walls": { "value": true },
        "infill_enable_travel_optimization": { "default_value": true },
        "infill_overlap":
        {
            "maximum_value_warning": 100,
            "minimum_value_warning": -50,
            "value": "10 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0"
        },
        "infill_pattern": { "value": "'tetrahedral'" },
        "infill_randomize_start_location": { "default_value": true },
        "initial_layer_line_width_factor": { "default_value": 130.0 },
        "jerk_enabled": { "value": false },
        "layer_height_0": { "resolve": "max(0.2, min(extruderValues('layer_height')))" },
        "line_width": { "value": "machine_nozzle_size" },
        "machine_center_is_zero": { "default_value": false },
        "machine_end_gcode": { "default_value": "G91 ;relative positioning\nG1 Z5 F500; move nozzle relative to position\nG90 ;absolute positioning\nG1 X0 Y{machine_depth}\nG12 P1 T3\nM104 S0\nM140 S0\nG92 E0\nM84\nM109 S50\nM81\n" },
        "machine_gcode_flavor": { "default_value": "RepRap (RepRap)" },
        "machine_heated_bed": { "default_value": true },
        "machine_name": { "default_value": "BLV mgn Cube" },
        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG92 E0 ;zero the extruded length\nM104 S170 T0; start preheat hotend_0\nM140 S{material_bed_temperature_layer_0} ; start preheating the bed\nM190 S{material_bed_temperature_layer_0} ; heat to Cura Bed setting\nG28\nG12 P1 S2 T3\nG34\nG29\nG1 X0 Y0 Z1 F9000\nM109 S{material_print_temperature_layer_0} T0\nG1 X100 Y0 Z{layer_height_0} E30 F500 ;intro line\nG92 E0 ;zero the extruded length again\nM117 Printing...\n" },
        "optimize_wall_printing_order": { "value": true },
        "retraction_amount": { "default_value": 5.5 },
        "retraction_combing": { "value": "'infill'" },
        "retraction_combing_max_distance": { "value": 10 },
        "retraction_count_max": { "value": 20 },
        "retraction_extrusion_window": { "value": "retraction_amount" },
        "retraction_hop": { "value": 0.4 },
        "retraction_hop_enabled": { "value": true },
        "retraction_prime_speed":
        {
            "maximum_value_warning": 130,
            "value": "math.ceil(retraction_speed * 0.4)"
        },
        "retraction_retract_speed": { "maximum_value_warning": 130 },
        "retraction_speed":
        {
            "default_value": 85,
            "maximum_value_warning": 130
        },
        "skin_overlap": { "value": 10.0 },
        "speed_layer_0": { "value": "math.ceil(speed_print * 0.25)" },
        "speed_print":
        {
            "maximum_value": 250,
            "maximum_value_warning": 151,
            "value": 100
        },
        "speed_roofing": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_slowdown_layers": { "default_value": 1 },
        "speed_topbottom": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_travel":
        {
            "maximum_value": 300,
            "maximum_value_warning": 251,
            "value": 120
        },
        "speed_travel_layer_0": { "value": "math.ceil(speed_travel * 0.4)" },
        "speed_wall": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_wall_0": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_wall_x": { "value": "math.ceil(speed_print * 0.66)" },
        "top_bottom_pattern": { "value": "'zigzag'" },
        "top_layers": { "value": 3 },
        "travel_retract_before_outer_wall": { "value": false },
        "wall_line_count": { "value": 3 },
        "wall_line_width": { "value": "machine_nozzle_size" },
        "z_seam_type": { "value": "'shortest'" },
        "zig_zaggify_infill": { "value": true }
    }
}