biqu_b1_abl.def.json 2.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445
  1. {
  2. "version": 2,
  3. "name": "Biqu B1 ABL",
  4. "inherits": "biqu_base",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "platform": "BIQU_SSS.stl",
  9. "has_machine_materials": true,
  10. "platform_offset": [
  11. 0,
  12. -7.4,
  13. 5
  14. ],
  15. "quality_definition": "biqu_base"
  16. },
  17. "overrides":
  18. {
  19. "coasting_enable": { "value": true },
  20. "gantry_height": { "value": 27.5 },
  21. "infill_overlap_mm": { "value": 0.06 },
  22. "machine_depth": { "value": 235 },
  23. "machine_head_with_fans_polygon":
  24. {
  25. "default_value": [
  26. [-33, 35],
  27. [-33, -23],
  28. [33, -23],
  29. [33, 35]
  30. ]
  31. },
  32. "machine_height": { "value": 270 },
  33. "machine_name": { "default_value": "BIQU B1 ABL" },
  34. "machine_start_gcode": { "default_value": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM117 Pre-heating the extruder\nM104 S160 ; Set Extruder temperature\nM117 Homing axes\nG28 ; Home all axes\nM117 ABL Probing\nG29\nM117 Getting the extruder up to temp\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0 ; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" },
  35. "machine_width": { "value": 235 },
  36. "retraction_amount": { "value": 7 },
  37. "retraction_speed": { "value": 70 },
  38. "speed_print": { "value": 60 },
  39. "support_angle": { "value": 45 },
  40. "support_enable": { "value": true },
  41. "support_infill_rate": { "value": 15 },
  42. "support_structure": { "value": "'normal'" },
  43. "support_type": { "value": "'buildplate'" }
  44. }
  45. }