Cura/resources/quality/alyanx3dp/alyanx3dp_flex_normal.inst.cfg

[general]
version = 4
definition = alyanx3dp
name = Flex Normal

[metadata]
setting_version = 5
type = quality
quality_type = alyanx_normal
weight = 2
material = alya_flex

[values]
adhesion_type = raft
layer_height_0 = 0.1
skirt_line_count = 2
skirt_gap = 2
fill_outline_gaps = True
infill_angles = [0,90 ]
infill_sparse_density = 15
material_diameter = 1.75
retraction_min_travel = 0.8
skin_angles = [0,90]
top_layers = 6
wall_line_count = 2
infill_pattern = grid
skin_line_width = 0.35
raft_airgap = 0.18
raft_base_line_spacing = 1.5
raft_base_line_width = 0.9
raft_base_thickness = 0.4
raft_interface_line_width = 0.4
raft_interface_thickness = 0.3
raft_margin = 5
raft_surface_layers = 3
raft_surface_line_width = 0.4
raft_surface_thickness = 0.2
retract_at_layer_change = true
retraction_hop = 0.5
retraction_hop_enabled = true
support_enable = True
support_type = everywhere
support_top_distance = 0.25
support_z_distance = 0.25
support_bottom_distance = 0.25
support_brim_width = 6
support_infill_rate = 15
support_line_distance = 1.7
support_line_width = 0.25
support_initial_layer_line_distance = 2.7
support_xy_distance = 0.71
infill_line_width = 0.4
line_width = 0.4
optimize_wall_printing_order = True
support_angle = 70
wall_line_width_x = 0.4
layer_0_z_overlap = 0.0
speed_print = 20
speed_topbottom = 15
speed_wall_0 = 15
speed_infill = 15
speed_layer_0 = 15
speed_support = 15
speed_support_interface = 15
speed_travel = 50
raft_base_speed = 10
raft_interface_speed = 15
raft_surface_speed = 15
raft_base_fan_speed = 0
raft_interface_fan_speed = 0
raft_surface_fan_speed = 100
retraction_amount = 1.5
retraction_speed = 20.0
cool_fan_speed = 30
cool_fan_speed_0 = 30