| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859 |
- [general]
- version = 4
- name = Fine
- definition = ultimaker3
- [metadata]
- setting_version = 19
- type = quality
- quality_type = normal
- weight = 0
- material = generic_pp
- variant = AA 0.4
- [values]
- brim_width = 20
- cool_fan_speed_max = 100
- cool_min_layer_time = 7
- cool_min_layer_time_fan_speed_max = 7
- cool_min_speed = 2.5
- infill_overlap = 0
- infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
- infill_wipe_dist = 0.1
- jerk_enabled = True
- jerk_print = 25
- machine_min_cool_heat_time_window = 15
- machine_nozzle_cool_down_speed = 0.85
- machine_nozzle_heat_up_speed = 1.5
- material_bed_temperature_layer_0 = =material_bed_temperature + 5
- material_final_print_temperature = =material_print_temperature - 10
- material_initial_print_temperature = =material_print_temperature - 5
- material_print_temperature = =default_material_print_temperature - 15
- material_print_temperature_layer_0 = =material_print_temperature + 3
- material_standby_temperature = 100
- multiple_mesh_overlap = 0
- prime_tower_enable = False
- prime_tower_size = 16
- prime_tower_wipe_enabled = True
- retraction_count_max = 12
- retraction_extra_prime_amount = 0.8
- retraction_extrusion_window = 1
- retraction_hop = 2
- retraction_hop_only_when_collides = True
- retraction_min_travel = 0.8
- retraction_prime_speed = 18
- speed_layer_0 = =math.ceil(speed_print * 15 / 25)
- speed_print = 25
- speed_topbottom = =math.ceil(speed_print * 25 / 25)
- speed_travel = 300
- speed_travel_layer_0 = 50
- speed_wall = =math.ceil(speed_print * 25 / 25)
- speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
- support_angle = 50
- switch_extruder_prime_speed = 15
- switch_extruder_retraction_amount = 20
- switch_extruder_retraction_speeds = 35
- top_bottom_thickness = 1
- wall_0_inset = 0
- wall_thickness = =line_width * 3
|
