deltacomb_FBE0.40_PETG_B.inst.cfg 833 B

123456789101112131415161718192021222324252627282930313233343536
  1. [general]
  2. version = 4
  3. name = B
  4. definition = deltacomb_base
  5. [metadata]
  6. setting_version = 19
  7. type = quality
  8. quality_type = D010
  9. material = generic_petg
  10. variant = FBE 0.40mm
  11. [values]
  12. material_print_temperature = 225
  13. layer_height_0 = 0.2
  14. cool_fan_full_at_height = 1
  15. cool_fan_speed = 60
  16. cool_fan_speed_max = 100
  17. cool_fan_speed_min = 60
  18. speed_print = 50
  19. speed_infill = =speed_print
  20. speed_wall_0 = =speed_print * 0.5
  21. speed_roofing = =speed_print * 0.5
  22. material_bed_temperature = 60
  23. material_bed_temperature_layer_0 = 45
  24. material_flow = 95
  25. infill_enable_travel_optimization = True
  26. initial_layer_line_width_factor = 120
  27. retraction_amount = 5
  28. coasting_enable = True
  29. coasting_volume = 0.256
  30. coasting_min_volume = 3
  31. coasting_speed = 70
  32. travel_avoid_other_parts = False
  33. retraction_combing_max_distance = 5
  34. support_z_distance = =layer_height * 2