fusion3_0.4_PLA_normal.inst.cfg 897 B

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. definition = fusion3
  3. name = Normal Quality
  4. version = 4
  5. [metadata]
  6. material = generic_pla
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. variant = 0.4mm Nozzle
  11. [values]
  12. adhesion_type = skirt
  13. cool_fan_enabled = True
  14. cool_fan_full_at_height = 0.8
  15. cool_fan_speed = 100
  16. cool_fan_speed_min = 15
  17. cool_min_layer_time = 5
  18. cool_min_layer_time_fan_speed_max = 65
  19. infill_overlap = 20
  20. infill_pattern = zigzag
  21. infill_sparse_density = 25
  22. inset_direction = outside_in
  23. layer_height_0 = 0.25
  24. line_width = 0.45
  25. material_bed_temperature = 55
  26. material_flow = 96
  27. material_flow_layer_0 = 96
  28. material_print_temperature = 230
  29. retract_at_layer_change = False
  30. retraction_amount = 4.25
  31. retraction_speed = 100
  32. skirt_gap = 5
  33. speed_topbottom = 55
  34. speed_travel = 150
  35. speed_travel_layer_0 = 100
  36. speed_wall_0 = 65
  37. speed_wall_x = 85
  38. top_bottom_thickness = 0.6
  39. wall_thickness = 1.35
  40. xy_offset_layer_0 = -0.15