| 12345678910111213141516171819202122232425262728293031323334353637383940414243 |
- {
- "version": 2,
- "name": "WEEFUN TINA2",
- "inherits": "weedo_base",
- "metadata":
- {
- "visible": true,
- "author": "WEEFUN",
- "manufacturer": "WEEFUN",
- "file_formats": "text/x-gcode",
- "platform_offset": [
- 0,
- 0,
- 0
- ]
- },
- "overrides":
- {
- "machine_center_is_zero": { "default_value": false },
- "machine_depth": { "default_value": 120 },
- "machine_end_gcode": { "default_value": ";(**** end.gcode for TINA2****)\nM104 S0\nM107\nG92 E0 (Reset after prime)\nG0 E-1 F300\nG1 Z105 F300\nG28 X0 Y0\nG1 Y90 F1000\nM203 Z30" },
- "machine_extruder_count": { "default_value": 1 },
- "machine_heated_bed": { "default_value": false },
- "machine_height": { "default_value": 100 },
- "machine_name": { "default_value": "WEEFUN TINA2" },
- "machine_start_gcode": { "default_value": ";(**** start.gcode for TINA2****)\nM104 S150\nG28 Z\nG28 X Y; Home extruder\nG1 X55 Y55 F1000\nG1 Z10 F200\nG29\nG1 Z15 F100\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X90 Y6 Z0.27 F2000\nG1 X20 Y6 Z0.27 E15 F1000 \nG92 E0 ; Reset extruder position\n\nM203 Z5" },
- "machine_width": { "default_value": 100 },
- "retraction_amount": { "default_value": 3 },
- "retraction_count_max": { "default_value": 10 },
- "retraction_speed": { "default_value": 35 },
- "speed_infill": { "value": 40.0 },
- "speed_print_layer_0": { "value": 22.0 },
- "speed_roofing": { "value": 25.0 },
- "speed_support_bottom": { "dvalue": 30.0 },
- "speed_support_infill": { "value": 45.0 },
- "speed_support_roof": { "value": 30.0 },
- "speed_topbottom": { "value": 30.0 },
- "speed_travel_layer_0": { "value": 60 },
- "speed_wall_0": { "value": 20.0 },
- "speed_wall_x": { "value": 25.0 },
- "support_xy_distance": { "default_value": 1.0 }
- }
- }
|
