Cura/resources/definitions/rigid3d_mucit.def.json

{
    "version": 2,
    "name": "Rigid3D Mucit",
    "inherits": "rigid3d_base",
    "metadata":
    {
        "visible": true,
        "platform": "rigid3d_mucit_platform.3mf",
        "platform_offset": [
            0,
            -19,
            0
        ],
        "preferred_material": "generic_pla_175",
        "preferred_quality_type": "standard",
        "quality_definition": "rigid3d_base"
    },
    "overrides":
    {
        "gantry_height": { "value": 20 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 150 },
        "machine_end_gcode": { "default_value": "G1 X0 Y145 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM84 ; Turn steppers off\n" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-20, 102],
                [-20, -45],
                [45, -45],
                [45, 102]
            ]
        },
        "machine_heated_bed": { "default_value": false },
        "machine_height": { "default_value": 150 },
        "machine_name": { "default_value": "Rigid3D Mucit" },
        "machine_start_gcode": { "default_value": "G21\nG28 ; Home extruder\nM420 S1 ; Enable MBL\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X30 Y30 F3000;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n" },
        "machine_width": { "default_value": 150 }
    }
}