hctech_hc300-m1&m1h.def.json 2.7 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253
  1. {
  2. "version": 2,
  3. "name": "HCTECH_HC300-M1&M1H",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "HCTECH",
  9. "manufacturer": "HCTECH",
  10. "file_formats": "text/x-gcode",
  11. "platform": "hctech_hc300-m1&m1h.3mf",
  12. "has_machine_quality": false,
  13. "machine_extruder_trains": { "0": "hctech_hc300-m1&m1h_extruder_0" }
  14. },
  15. "overrides":
  16. {
  17. "adhesion_type": { "default_value": "skirt" },
  18. "cool_fan_speed": { "value": 75 },
  19. "gantry_height": { "value": "55" },
  20. "infill_before_walls": { "value": false },
  21. "line_width": { "value": 0.38 },
  22. "machine_center_is_zero": { "default_value": false },
  23. "machine_depth": { "default_value": 300 },
  24. "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 P1;clean nozzle\nG1 X5 Y300 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
  25. "machine_extruder_count": { "default_value": 1 },
  26. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  27. "machine_head_with_fans_polygon":
  28. {
  29. "default_value": [
  30. [-61, 86],
  31. [-61, -31],
  32. [21, -31],
  33. [21, 86]
  34. ]
  35. },
  36. "machine_heated_bed": { "default_value": true },
  37. "machine_height": { "default_value": 300 },
  38. "machine_name": { "default_value": "HCTECH HC300-M1&M1H" },
  39. "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
  40. "machine_width": { "default_value": 300 },
  41. "material_diameter": { "default_value": 1.75 },
  42. "retraction_amount":
  43. {
  44. "default_value": 0.3,
  45. "maximum_value_warning": 2.0
  46. },
  47. "retraction_speed": { "default_value": 35 },
  48. "speed_print": { "default_value": 60.0 },
  49. "travel_avoid_distance": { "value": 1 },
  50. "travel_avoid_supports": { "value": true },
  51. "travel_retract_before_outer_wall": { "value": true }
  52. }
  53. }