Cura/resources/extruders/deltacomb_dc20flux_extruder_1.def.json

{
    "version":              2,
    "name":                 "Extruder 2",
    "inherits":             "fdmextruder",
    "metadata": {
        "machine":          "deltacomb_dc20flux",
        "position":         "1"
    },


    "overrides": {
        "extruder_nr":                   { "default_value": 1 },
        "machine_nozzle_size":           { "default_value": 0.4 },
        "material_diameter":             { "default_value": 1.75 },
        "machine_nozzle_offset_x":       { "default_value": 0.0 },
        "machine_nozzle_offset_y":       { "default_value": 0.0 },
        "machine_extruder_start_code":   { "default_value": ";---------------------------------------\n;DC20 Flux Extruder 2 Start\n;---------------------------------------\nG92 E0 ;zero the extruded length\nG91 ;use relative coordinates\nG1 E68 F10000 ; fast insert\nG92 E0 ;zero the extruded length\nG90 ;absolute positioning\n;---------------------------------------\n;---------------------------------------"},
        "machine_extruder_end_code":     { "default_value": ";---------------------------------------\n;DC20 Flux Extruder 2 End\n;---------------------------------------\nG91 ;use relative coordinates\nG0 E-15 F10000\nG1 Z2 ;lift head\nG4 P3000\nG0 E14.7 F10000\nG1 E-69.7 F10000\nG90 ;absolute positioning\nG92 E0 ;zero the extruded length\n;---------------------------------------\n;---------------------------------------"},
        "prime_tower_flow":              { "value": "200" }
    }
}