makeit_pro_m.def.json 3.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596
  1. {
  2. "version": 2,
  3. "name": "MAKEiT Pro-M",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "unknown",
  8. "manufacturer": "MAKEiT 3D",
  9. "file_formats": "text/x-gcode",
  10. "has_materials": false,
  11. "machine_extruder_trains":
  12. {
  13. "0": "makeit_dual_1st",
  14. "1": "makeit_dual_2nd"
  15. }
  16. },
  17. "overrides": {
  18. "machine_name": { "default_value": "MAKEiT Pro-M" },
  19. "machine_width": {
  20. "default_value": 200
  21. },
  22. "machine_height": {
  23. "default_value": 200
  24. },
  25. "machine_depth": {
  26. "default_value": 240
  27. },
  28. "machine_center_is_zero": {
  29. "default_value": false
  30. },
  31. "machine_head_with_fans_polygon":
  32. {
  33. "default_value": [
  34. [ -200, 240 ],
  35. [ -200, -32 ],
  36. [ 200, 240 ],
  37. [ 200, -32 ]
  38. ]
  39. },
  40. "gantry_height": {
  41. "value": "200"
  42. },
  43. "machine_use_extruder_offset_to_offset_coords": {
  44. "default_value": true
  45. },
  46. "machine_gcode_flavor": {
  47. "default_value": "RepRap (Marlin/Sprinter)"
  48. },
  49. "machine_start_gcode": {
  50. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..."
  51. },
  52. "machine_end_gcode": {
  53. "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-5 F9000 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5 X+20 Y+20 F9000 ;move Z up a bit\nM117 MAKEiT Pro@Done\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM81"
  54. },
  55. "machine_extruder_count": {
  56. "default_value": 2
  57. },
  58. "print_sequence": {
  59. "enabled": false
  60. },
  61. "prime_tower_position_x": {
  62. "value": "185"
  63. },
  64. "prime_tower_position_y": {
  65. "value": "160"
  66. },
  67. "layer_height": {
  68. "default_value": 0.2
  69. },
  70. "retraction_speed": {
  71. "default_value": 180
  72. },
  73. "infill_sparse_density": {
  74. "default_value": 20
  75. },
  76. "retraction_amount": {
  77. "default_value": 6
  78. },
  79. "speed_print": {
  80. "default_value": 60
  81. },
  82. "wall_thickness": {
  83. "value": "1.2"
  84. },
  85. "cool_min_layer_time_fan_speed_max": {
  86. "default_value": 5
  87. },
  88. "adhesion_type": {
  89. "default_value": "skirt"
  90. },
  91. "machine_heated_bed": {
  92. "default_value": true
  93. }
  94. }
  95. }