alfawise_u20.def.json 2.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172
  1. {
  2. "name": "Alfawise U20",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Samuel Pinches",
  8. "manufacturer": "Alfawise",
  9. "file_formats": "text/x-gcode",
  10. "preferred_quality_type": "fast",
  11. "machine_extruder_trains":
  12. {
  13. "0": "alfawise_u20_extruder_0"
  14. }
  15. },
  16. "overrides": {
  17. "machine_name": {
  18. "default_value": "Alfawise U20"
  19. },
  20. "machine_start_gcode": {
  21. "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 Y60.0 Z0 E9.0 F1000.0;intro line\nG1 Y100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --"
  22. },
  23. "machine_end_gcode": {
  24. "default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y280 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --"
  25. },
  26. "machine_width": {
  27. "default_value": 300
  28. },
  29. "machine_height": {
  30. "default_value": 400
  31. },
  32. "machine_depth": {
  33. "default_value": 300
  34. },
  35. "machine_heated_bed": {
  36. "default_value": true
  37. },
  38. "machine_center_is_zero": {
  39. "default_value": false
  40. },
  41. "gantry_height": {
  42. "value": "10"
  43. },
  44. "machine_gcode_flavor": {
  45. "default_value": "RepRap (Marlin/Sprinter)"
  46. },
  47. "material_diameter": {
  48. "default_value": 1.75
  49. },
  50. "layer_height_0": {
  51. "default_value": 0.2
  52. },
  53. "wall_thickness": {
  54. "value": "1.2"
  55. },
  56. "speed_print": {
  57. "default_value": 40
  58. },
  59. "support_enable": {
  60. "default_value": true
  61. },
  62. "retraction_enable": {
  63. "default_value": true
  64. },
  65. "retraction_amount": {
  66. "default_value": 5
  67. },
  68. "retraction_speed": {
  69. "default_value": 45
  70. }
  71. }
  72. }