| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758 |
- {
- "version": 2,
- "name": "HCTECH_HC300-M3",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "HCTECH",
- "manufacturer": "HCTECH",
- "file_formats": "text/x-gcode",
- "platform": "hctech_hc300-m3.3mf",
- "has_machine_quality": false,
- "machine_extruder_trains": {
- "0": "hctech_hc300-m3_extruder_0"
- }
- },
- "overrides": {
- "machine_head_with_fans_polygon":
- { "default_value": [
- [-49, 36],
- [-36, -29],
- [36, -29],
- [36, 49]
- ]
- },
- "machine_name": { "default_value": "HCTECH HC300-M3" },
- "machine_extruder_count": { "default_value": 1 },
- "machine_heated_bed": { "default_value": true },
- "machine_width": { "default_value": 300 },
- "machine_depth": { "default_value": 300 },
- "machine_height": { "default_value": 300 },
- "machine_center_is_zero": { "default_value": false },
- "retraction_amount": {
- "default_value": 3,
- "maximum_value_warning": 8
- },
- "adhesion_type": { "default_value": "skirt" },
- "retraction_speed": { "default_value": 35},
- "travel_avoid_supports": { "value": true },
- "travel_retract_before_outer_wall": { "value": true },
- "retraction_enable": { "value": true },
- "gantry_height": { "value": "55" },
- "speed_print": { "default_value": 60.0 } ,
- "material_diameter": { "default_value": 1.75 },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_start_gcode": { "default_value": "G28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
- "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 Z1 E-2 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG1 X5 Y290 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z" },
-
- "cool_fan_speed": { "value": 75 },
- "cool_fan_enabled": { "value": true },
-
- "line_width": { "value": 0.38 },
- "travel_avoid_distance": { "value": 1 },
- "infill_before_walls": { "value": false }
- }
- }
|
