Cura/resources/definitions/ultimaker2_plus.def.json

{
    "version": 2,
    "name": "Ultimaker 2+",
    "inherits": "ultimaker2",
    "metadata":
    {
        "author": "Ultimaker",
        "manufacturer": "Ultimaker B.V.",
        "file_formats": "text/x-gcode",
        "platform": "ultimaker2_platform.obj",
        "exclude_materials": [
            "structur3d_dap100silicone",
            "generic_hips",
            "generic_petg",
            "generic_bam",
            "generic_pva",
            "generic_tough_pla",
            "generic_cffcpe",
            "generic_cffpa",
            "generic_gffcpe",
            "generic_gffpa",
            "generic_petcf",
            "ultimaker_bam",
            "ultimaker_pva",
            "ultimaker_tough_pla_black",
            "ultimaker_tough_pla_green",
            "ultimaker_tough_pla_red",
            "ultimaker_tough_pla_white",
            "ultimaker_petg_red",
            "ultimaker_petg_blue",
            "ultimaker_petg_grey",
            "ultimaker_petg_black",
            "ultimaker_petg_green",
            "ultimaker_petg_white",
            "ultimaker_petg_orange",
            "ultimaker_petg_silver",
            "ultimaker_petg_yellow",
            "ultimaker_petg_transparent",
            "ultimaker_petg_red_translucent",
            "ultimaker_petg_blue_translucent",
            "ultimaker_petg_green_translucent",
            "ultimaker_petg_yellow_fluorescent",
            "ultimaker_petcf_black",
            "ultimaker_petcf_blue",
            "ultimaker_petcf_gray"
        ],
        "firmware_file": "MarlinUltimaker2plus.hex",
        "first_start_actions": [],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains": { "0": "ultimaker2_plus_extruder_0" },
        "platform_texture": "Ultimaker2Plusbackplate.png",
        "preferred_variant_name": "0.4 mm",
        "supported_actions": [],
        "weight": 1
    },
    "overrides":
    {
        "gantry_height": { "value": "52" },
        "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
        "machine_disallowed_areas":
        {
            "default_value": [
                [
                    [-115, 112.5],
                    [-78, 112.5],
                    [-80, 102.5],
                    [-115, 102.5]
                ],
                [
                    [115, 112.5],
                    [115, 102.5],
                    [105, 102.5],
                    [103, 112.5]
                ],
                [
                    [-115, -112.5],
                    [-115, -104.5],
                    [-84, -104.5],
                    [-82, -112.5]
                ],
                [
                    [115, -112.5],
                    [108, -112.5],
                    [110, -104.5],
                    [115, -104.5]
                ]
            ]
        },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-44, 14],
                [-44, -34],
                [64, 14],
                [64, -34]
            ]
        },
        "machine_heat_zone_length": { "default_value": 20 },
        "machine_height": { "default_value": 205 },
        "machine_name": { "default_value": "Ultimaker 2+" },
        "machine_nozzle_head_distance": { "default_value": 5 },
        "machine_show_variants": { "default_value": true },
        "speed_infill": { "value": "speed_print" },
        "speed_support": { "value": "speed_wall_0" },
        "speed_wall_x": { "value": "speed_wall" }
    }
}