Cura/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg

[general]
version = 4
name = Fine
definition = ultimaker2_plus_connect

[metadata]
setting_version = 19
type = quality
quality_type = normal
weight = 0
material = generic_pc
variant = 0.4 mm

[values]
cool_fan_speed = 50
cool_fan_speed_min = 0
cool_min_layer_time = 3
cool_min_speed = 8
infill_overlap = =0 if infill_sparse_density > 80 else 5
infill_sparse_density = 20
layer_0_z_overlap = 0.3
raft_airgap = 0.35
raft_base_line_spacing = 1.6
raft_base_line_width = 0.8
raft_interface_line_spacing = 1
raft_interface_line_width = 0.8
raft_margin = 15
speed_layer_0 = =round(speed_print * 30 / 45)
speed_print = 45
speed_wall_0 = =math.ceil(speed_print * 20 / 45)
speed_wall_x = =math.ceil(speed_print * 30 / 45)
support_angle = 45
support_enable = True
support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
support_pattern = lines
support_z_distance = 0.19
wall_thickness = 1.2