alyanx3dp_normal.inst.cfg 1.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657
  1. [general]
  2. version = 4
  3. name = Normal
  4. definition = alyanx3dp
  5. [metadata]
  6. setting_version = 19
  7. type = quality
  8. quality_type = alyanx_normal
  9. weight = 0
  10. global_quality = True
  11. [values]
  12. layer_height = 0.16
  13. layer_height_0 = 0.1
  14. adhesion_type = raft
  15. skirt_line_count = 2
  16. skirt_gap = 2
  17. fill_outline_gaps = True
  18. infill_angles = [0,90 ]
  19. infill_sparse_density = 15
  20. retraction_min_travel = 0.8
  21. skin_angles = [0,90]
  22. top_layers = 6
  23. wall_line_count = 2
  24. infill_pattern = grid
  25. skin_line_width = 0.4
  26. raft_base_line_spacing = 2.6
  27. raft_base_line_width = 1.2
  28. raft_base_thickness = 0.3
  29. raft_interface_line_width = 0.4
  30. raft_interface_thickness = 0.3
  31. raft_interface_line_spacing = 0.8
  32. raft_margin = 5
  33. raft_surface_layers = 3
  34. raft_surface_line_width = 0.4
  35. raft_surface_thickness = 0.2
  36. retract_at_layer_change = true
  37. retraction_hop = 0.5
  38. retraction_hop_enabled = true
  39. support_type = everywhere
  40. support_interface_pattern =lines
  41. support_top_distance = 0.15
  42. support_z_distance = 0.25
  43. support_bottom_distance = 0.15
  44. support_brim_width = 6
  45. support_infill_rate = =15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15
  46. support_line_distance = 1.7
  47. support_line_width = 0.25
  48. support_initial_layer_line_distance = 2.7
  49. support_xy_distance = 0.7
  50. infill_line_width = 0.4
  51. line_width = 0.4
  52. optimize_wall_printing_order = True
  53. support_angle = 70
  54. wall_line_width_x = 0.4
  55. wall_line_width_0 = 0.35