snapmaker2.def.json 2.9 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677
  1. {
  2. "version": 2,
  3. "name": "Snapmaker 2",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": false,
  7. "manufacturer": "Snapmaker",
  8. "file_formats": "text/x-gcode",
  9. "machine_extruder_trains": {
  10. "0": "snapmaker_extruder_0"
  11. },
  12. "has_materials": true,
  13. "has_machine_quality": true,
  14. "preferred_quality_type": "normal",
  15. "preferred_material": "generic_pla",
  16. "exclude_materials": [ ]
  17. },
  18. "overrides": {
  19. "machine_name": {
  20. "default_value": "Snapmaker"
  21. },
  22. "machine_buildplate_type": {
  23. "default_value": "aluminum"
  24. },
  25. "machine_heated_bed": {
  26. "default_value": true
  27. },
  28. "machine_start_gcode": {
  29. "default_value": "M104 S{material_print_temperature_layer_0} ;Set Hotend Temperature\nM140 S{material_bed_temperature_layer_0} ;Set Bed Temperature\nG28 ;home\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000 ;Move to corner \nG1 Z0 F1800 ;Go to zero offset\nM109 S{material_print_temperature_layer_0} ;Wait for Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ;Wait for Bed Temperature\nG92 E0 ;Zero set extruder position\nG1 E20 F200 ;Feed filament to clear nozzle\nG92 E0 ;Zero set extruder position"
  30. },
  31. "machine_end_gcode": {
  32. "default_value": "M104 S0 ;Extruder heater off\nM140 S0 ;Heated bed heater off\nG90 ;absolute positioning\nG92 E0 ;Retract the filament\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z{machine_height} E-1 F3000 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y{machine_depth} F3000 ;so the head is out of the way and Plate is moved forward"
  33. },
  34. "machine_nozzle_size": {
  35. "default_value": 0.4
  36. },
  37. "material_diameter": {
  38. "default_value": 1.75
  39. },
  40. "machine_max_acceleration_x": {
  41. "default_value": 1000
  42. },
  43. "machine_max_acceleration_y": {
  44. "default_value": 1000
  45. },
  46. "machine_max_acceleration_z": {
  47. "default_value": 1000
  48. },
  49. "machine_max_acceleration_e": {
  50. "default_value": 1000
  51. },
  52. "machine_acceleration": {
  53. "default_value": 1000
  54. },
  55. "material_print_temp_prepend": {
  56. "default_value": false
  57. },
  58. "material_bed_temp_prepend": {
  59. "default_value": false
  60. },
  61. "default_material_print_temperature": {
  62. "default_value": 205
  63. },
  64. "retraction_enable": {
  65. "default_value": true
  66. },
  67. "retraction_amount": {
  68. "default_value": 5
  69. },
  70. "retraction_speed": {
  71. "default_value": 60
  72. },
  73. "retract_at_layer_change": {
  74. "default_value": false
  75. }
  76. }
  77. }