Cura/resources/definitions/flsun_q5.def.json

{
    "version": 2,
    "name": "Flsun Q5",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "manufacturer": "Flsun",
        "author": "Daniel Kreuzhofer",
        "file_formats": "text/x-gcode",
        "machine_extruder_trains": {
            "0": "flsun_q5_extruder"
        }
    },
    "overrides": {
        "machine_extruder_count": {
            "default_value": 1
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "machine_width": {
            "default_value": 200
        },
        "machine_height": {
            "default_value": 200
        },
        "machine_depth": {
            "default_value": 200
        },
        "machine_center_is_zero": {
            "default_value": true
        },
        "machine_gcode_flavor": {
            "default_value": "RepRap (Marlin/Sprinter)"
        },
        "machine_start_gcode": {
            "default_value": ";FLAVOR:Marlin\r\nM82 ;absolute extrusion mode\r\nG21\r\nG90\r\nM82\r\nM107 T0\r\nG28\r\nG92 E0\r\nG0 E3 F200\r\nG92 E0 ; reset extrusion distance\r\nM106 S255 ; Enable cooling fan full speed\r\nG1 X-98 Y0 Z0.4 F3000 ; move to arc start\r\nG3 X0 Y-98 I98 Z0.4 E40 F400 ; lay arc stripe 90deg\r\nG92 E0 ; reset extrusion distance\r\nG4 P500 ; wait for 0.5 sec\r\nG0 Z10 E-1 ; Lift 15mm and retract 1mm filament\r\nG4 P2000 ; wait for 5 sec\r\nG0 Z15\r\nM107 ; Disable cooling fan\r\nG1 X0 Y-85 Z4 E0 F3000 ; get off the bed"
        },
        "machine_end_gcode": {
            "default_value": "M104 S0\r\nM140 S0\r\nG92 E1\r\nG1 E-1 F300\r\nG28 X0 Y0\r\nM84\r\nM82 ;absolute extrusion mode\r\nM104 S0"
        },
        "machine_shape": {
            "default_value": "elliptic"
        }
    }
}