SV03.def.json 4.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566
  1. {
  2. "version": 2,
  3. "name": "Sovol-SV03",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Sovol",
  8. "manufacturer": "Sovol 3D",
  9. "file_formats": "text/x-gcode",
  10. "has_variants": false,
  11. "has_machine_quality": false,
  12. "preferred_quality_type": "draft",
  13. "machine_extruder_trains": {
  14. "0": "SV03_extruder_0"
  15. }
  16. },
  17. "overrides": {
  18. "machine_name": { "default_value": "SV03" },
  19. "machine_extruder_count": { "default_value": 1 },
  20. "machine_width": { "default_value": 350 },
  21. "machine_depth": { "default_value": 350 },
  22. "machine_height": { "default_value": 400 },
  23. "machine_max_feedrate_x": { "value": 500 },
  24. "machine_max_feedrate_y": { "value": 500 },
  25. "machine_max_feedrate_z": { "value": 10 },
  26. "machine_max_feedrate_e": { "value": 50 },
  27. "machine_max_acceleration_x": { "value": 500 },
  28. "machine_max_acceleration_y": { "value": 500 },
  29. "machine_max_acceleration_z": { "value": 100 },
  30. "machine_max_acceleration_e": { "value": 5000 },
  31. "machine_acceleration": { "value": 500 },
  32. "machine_max_jerk_xy": { "value": 10 },
  33. "machine_max_jerk_z": { "value": 0.4 },
  34. "machine_max_jerk_e": { "value": 5 },
  35. "machine_heated_bed": { "default_value": true },
  36. "material_diameter": { "default_value": 1.75 },
  37. "acceleration_print": { "value": 500 },
  38. "acceleration_travel": { "value": 500 },
  39. "acceleration_travel_layer_0": { "value": "acceleration_travel" },
  40. "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
  41. "jerk_print": { "value": 8 },
  42. "jerk_travel": { "value": "jerk_print" },
  43. "jerk_travel_layer_0": { "value": "jerk_travel" },
  44. "acceleration_enabled": { "value": false },
  45. "jerk_enabled": { "value": false },
  46. "speed_print": { "value": 50.0 } ,
  47. "skirt_brim_speed": { "value": "speed_layer_0" },
  48. "optimize_wall_printing_order": { "value": "True" },
  49. "material_initial_print_temperature": { "value": "material_print_temperature" },
  50. "material_final_print_temperature": { "value": "material_print_temperature" },
  51. "z_seam_type": { "value": "'back'" },
  52. "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
  53. "infill_pattern": { "value": "'lines'" },
  54. "infill_before_walls": { "value": false },
  55. "infill_overlap": { "value": 30.0 },
  56. "skin_overlap": { "value": 10.0 },
  57. "infill_wipe_dist": { "value": 0.0 },
  58. "wall_0_wipe_dist": { "value": 0.0 },
  59. "retraction_amount": { "default_value": 3},
  60. "retraction_speed": { "default_value": 50},
  61. "adhesion_type": { "value": "'skirt'" },
  62. "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nG29 ;Automatic Leveling\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
  63. "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }
  64. }
  65. }