| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- [general]
- version = 4
- name = Extra Fast
- definition = liquid
- [metadata]
- setting_version = 19
- type = quality
- quality_type = verydraft
- weight = -3
- material = generic_tpu
- variant = VO 0.8
- [values]
- brim_width = 8.75
- cool_min_layer_time_fan_speed_max = 6
- top_skin_expand_distance = =line_width * 2
- infill_before_walls = True
- infill_line_width = =round(line_width * 0.7 / 0.8, 2)
- infill_pattern = cross_3d
- infill_sparse_density = 10
- jerk_prime_tower = =math.ceil(jerk_print * 25 / 15)
- jerk_support = =math.ceil(jerk_print * 25 / 15)
- jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
- machine_nozzle_cool_down_speed = 0.5
- machine_nozzle_heat_up_speed = 2.5
- material_final_print_temperature = =material_print_temperature
- material_flow = 105
- material_initial_print_temperature = =material_print_temperature
- material_print_temperature_layer_0 = =material_print_temperature + 17
- material_standby_temperature = 100
- multiple_mesh_overlap = 0.2
- prime_tower_enable = True
- prime_tower_flow = 100
- retract_at_layer_change = False
- retraction_count_max = 12
- retraction_extra_prime_amount = 0.5
- retraction_hop = 1.5
- retraction_hop_only_when_collides = False
- retraction_min_travel = =line_width * 2
- retraction_prime_speed = 15
- skin_line_width = =round(line_width * 0.78 / 0.8, 2)
- speed_print = 30
- speed_topbottom = =math.ceil(speed_print * 23 / 30)
- speed_wall = =math.ceil(speed_print * 30 / 30)
- speed_wall_x = =math.ceil(speed_wall * 30 / 30)
- support_angle = 50
- support_bottom_distance = =support_z_distance
- support_line_width = =round(line_width * 0.7 / 0.8, 2)
- support_offset = =line_width
- switch_extruder_prime_speed = 15
- switch_extruder_retraction_amount = 20
- switch_extruder_retraction_speeds = 45
- top_bottom_thickness = 1.2
- travel_avoid_distance = 1.5
- travel_compensate_overlapping_walls_0_enabled = False
- wall_0_wipe_dist = =line_width * 2
- wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
- wall_thickness = 1.3
- jerk_travel = 20
|
