Cura/plugins/GCodeReader/FlavorParser.py

# Copyright (c) 2018 Ultimaker B.V.
# Cura is released under the terms of the LGPLv3 or higher.

import math
import re
from typing import Dict, List, NamedTuple, Optional, Union, Set

import numpy

from UM.Backend import Backend
from UM.Job import Job
from UM.Logger import Logger
from UM.Math.Vector import Vector
from UM.Message import Message
from UM.i18n import i18nCatalog

from cura.CuraApplication import CuraApplication
from cura.LayerDataBuilder import LayerDataBuilder
from cura.LayerDataDecorator import LayerDataDecorator
from cura.LayerPolygon import LayerPolygon
from cura.Scene.CuraSceneNode import CuraSceneNode
from cura.Scene.GCodeListDecorator import GCodeListDecorator
from cura.Settings.ExtruderManager import ExtruderManager

catalog = i18nCatalog("cura")

PositionOptional = NamedTuple("Position", [("x", Optional[float]), ("y", Optional[float]), ("z", Optional[float]), ("f", Optional[float]), ("e", Optional[float])])
Position = NamedTuple("Position", [("x", float), ("y", float), ("z", float), ("f", float), ("e", List[float])])


##  This parser is intended to interpret the common firmware codes among all the
#   different flavors
class FlavorParser:

    def __init__(self) -> None:
        CuraApplication.getInstance().hideMessageSignal.connect(self._onHideMessage)
        self._cancelled = False
        self._message = None  # type: Optional[Message]
        self._layer_number = 0
        self._extruder_number = 0
        # All extruder numbers that have been seen
        self._extruders_seen = {0}  # type: Set[int]
        self._clearValues()
        self._scene_node = None
        # X, Y, Z position, F feedrate and E extruder values are stored
        self._position = Position
        self._is_layers_in_file = False  # Does the Gcode have the layers comment?
        self._extruder_offsets = {}  # type: Dict[int, List[float]] # Offsets for multi extruders. key is index, value is [x-offset, y-offset]
        self._current_layer_thickness = 0.2  # default
        self._filament_diameter = 2.85       # default
        self._previous_extrusion_value = 0.0  # keep track of the filament retractions

        CuraApplication.getInstance().getPreferences().addPreference("gcodereader/show_caution", True)

    def _clearValues(self) -> None:
        self._extruder_number = 0
        self._extrusion_length_offset = [0] # type: List[float]
        self._layer_type = LayerPolygon.Inset0Type
        self._layer_number = 0
        self._previous_z = 0 # type: float
        self._layer_data_builder = LayerDataBuilder()
        self._is_absolute_positioning = True    # It can be absolute (G90) or relative (G91)
        self._is_absolute_extrusion = True  # It can become absolute (M82, default) or relative (M83)

    @staticmethod
    def _getValue(line: str, code: str) -> Optional[Union[str, int, float]]:
        n = line.find(code)
        if n < 0:
            return None
        n += len(code)
        pattern = re.compile("[;\\s]")
        match = pattern.search(line, n)
        m = match.start() if match is not None else -1
        try:
            if m < 0:
                return line[n:]
            return line[n:m]
        except:
            return None

    def _getInt(self, line: str, code: str) -> Optional[int]:
        value = self._getValue(line, code)
        try:
            return int(value)   # type: ignore
        except:
            return None

    def _getFloat(self, line: str, code: str) -> Optional[float]:
        value = self._getValue(line, code)
        try:
            return float(value) # type: ignore
        except:
            return None

    def _onHideMessage(self, message: str) -> None:
        if message == self._message:
            self._cancelled = True

    def _createPolygon(self, layer_thickness: float, path: List[List[Union[float, int]]], extruder_offsets: List[float]) -> bool:
        countvalid = 0
        for point in path:
            if point[5] > 0:
                countvalid += 1
                if countvalid >= 2:
                    # we know what to do now, no need to count further
                    continue
        if countvalid < 2:
            return False
        try:
            self._layer_data_builder.addLayer(self._layer_number)
            self._layer_data_builder.setLayerHeight(self._layer_number, path[0][2])
            self._layer_data_builder.setLayerThickness(self._layer_number, layer_thickness)
            this_layer = self._layer_data_builder.getLayer(self._layer_number)
            if not this_layer:
                return False
        except ValueError:
            return False
        count = len(path)
        line_types = numpy.empty((count - 1, 1), numpy.int32)
        line_widths = numpy.empty((count - 1, 1), numpy.float32)
        line_thicknesses = numpy.empty((count - 1, 1), numpy.float32)
        line_feedrates = numpy.empty((count - 1, 1), numpy.float32)
        line_widths[:, 0] = 0.35  # Just a guess
        line_thicknesses[:, 0] = layer_thickness
        points = numpy.empty((count, 3), numpy.float32)
        extrusion_values = numpy.empty((count, 1), numpy.float32)
        i = 0
        for point in path:
            points[i, :] = [point[0] + extruder_offsets[0], point[2], -point[1] - extruder_offsets[1]]
            extrusion_values[i] = point[4]
            if i > 0:
                line_feedrates[i - 1] = point[3]
                line_types[i - 1] = point[5]
                if point[5] in [LayerPolygon.MoveCombingType, LayerPolygon.MoveRetractionType]:
                    line_widths[i - 1] = 0.1
                    line_thicknesses[i - 1] = 0.0 # Travels are set as zero thickness lines
                else:
                    line_widths[i - 1] = self._calculateLineWidth(points[i], points[i-1], extrusion_values[i], extrusion_values[i-1], layer_thickness)
            i += 1

        this_poly = LayerPolygon(self._extruder_number, line_types, points, line_widths, line_thicknesses, line_feedrates)
        this_poly.buildCache()

        this_layer.polygons.append(this_poly)
        return True

    def _createEmptyLayer(self, layer_number: int) -> None:
        self._layer_data_builder.addLayer(layer_number)
        self._layer_data_builder.setLayerHeight(layer_number, 0)
        self._layer_data_builder.setLayerThickness(layer_number, 0)

    def _calculateLineWidth(self, current_point: Position, previous_point: Position, current_extrusion: float, previous_extrusion: float, layer_thickness: float) -> float:
        # Area of the filament
        Af = (self._filament_diameter / 2) ** 2 * numpy.pi
        # Length of the extruded filament
        de = current_extrusion - previous_extrusion
        # Volumne of the extruded filament
        dVe = de * Af
        # Length of the printed line
        dX = numpy.sqrt((current_point[0] - previous_point[0])**2 + (current_point[2] - previous_point[2])**2)
        # When the extruder recovers from a retraction, we get zero distance
        if dX == 0:
            return 0.1
        # Area of the printed line. This area is a rectangle
        Ae = dVe / dX
        # This area is a rectangle with area equal to layer_thickness * layer_width
        line_width = Ae / layer_thickness

        # A threshold is set to avoid weird paths in the GCode
        if line_width > 1.2:
            return 0.35
        return line_width

    def _gCode0(self, position: Position, params: PositionOptional, path: List[List[Union[float, int]]]) -> Position:
        x, y, z, f, e = position

        if self._is_absolute_positioning:
            x = params.x if params.x is not None else x
            y = params.y if params.y is not None else y
            z = params.z if params.z is not None else z
        else:
            x += params.x if params.x is not None else 0
            y += params.y if params.y is not None else 0
            z += params.z if params.z is not None else 0

        f = params.f if params.f is not None else f

        if params.e is not None:
            new_extrusion_value = params.e if self._is_absolute_extrusion else e[self._extruder_number] + params.e
            if new_extrusion_value > e[self._extruder_number]:
                path.append([x, y, z, f, new_extrusion_value + self._extrusion_length_offset[self._extruder_number], self._layer_type])  # extrusion
                self._previous_extrusion_value = new_extrusion_value
            else:
                path.append([x, y, z, f, new_extrusion_value + self._extrusion_length_offset[self._extruder_number], LayerPolygon.MoveRetractionType])  # retraction
            e[self._extruder_number] = new_extrusion_value

            # Only when extruding we can determine the latest known "layer height" which is the difference in height between extrusions
            # Also, 1.5 is a heuristic for any priming or whatsoever, we skip those.
            if z > self._previous_z and (z - self._previous_z < 1.5):
                self._current_layer_thickness = z - self._previous_z # allow a tiny overlap
                self._previous_z = z
        elif self._previous_extrusion_value > e[self._extruder_number]:
            path.append([x, y, z, f, e[self._extruder_number] + self._extrusion_length_offset[self._extruder_number], LayerPolygon.MoveRetractionType])
        else:
            path.append([x, y, z, f, e[self._extruder_number] + self._extrusion_length_offset[self._extruder_number], LayerPolygon.MoveCombingType])
        return self._position(x, y, z, f, e)


    # G0 and G1 should be handled exactly the same.
    _gCode1 = _gCode0

    ##  Home the head.
    def _gCode28(self, position: Position, params: PositionOptional, path: List[List[Union[float, int]]]) -> Position:
        return self._position(
            params.x if params.x is not None else position.x,
            params.y if params.y is not None else position.y,
            params.z if params.z is not None else position.z,
            position.f,
            position.e)

    ##  Set the absolute positioning
    def _gCode90(self, position: Position, params: PositionOptional, path: List[List[Union[float, int]]]) -> Position:
        self._is_absolute_positioning = True
        self._is_absolute_extrusion = True
        return position

    ##  Set the relative positioning
    def _gCode91(self, position: Position, params: PositionOptional, path: List[List[Union[float, int]]]) -> Position:
        self._is_absolute_positioning = False
        self._is_absolute_extrusion = False
        return position

    ##  Reset the current position to the values specified.
    #   For example: G92 X10 will set the X to 10 without any physical motion.
    def _gCode92(self, position: Position, params: PositionOptional, path: List[List[Union[float, int]]]) -> Position:
        if params.e is not None:
            # Sometimes a G92 E0 is introduced in the middle of the GCode so we need to keep those offsets for calculate the line_width
            self._extrusion_length_offset[self._extruder_number] += position.e[self._extruder_number] - params.e
            position.e[self._extruder_number] = params.e
            self._previous_extrusion_value = params.e
        else:
            self._previous_extrusion_value = 0.0
        return self._position(
            params.x if params.x is not None else position.x,
            params.y if params.y is not None else position.y,
            params.z if params.z is not None else position.z,
            params.f if params.f is not None else position.f,
            position.e)

    def processGCode(self, G: int, line: str, position: Position, path: List[List[Union[float, int]]]) -> Position:
        func = getattr(self, "_gCode%s" % G, None)
        line = line.split(";", 1)[0]  # Remove comments (if any)
        if func is not None:
            s = line.upper().split(" ")
            x, y, z, f, e = None, None, None, None, None
            for item in s[1:]:
                if len(item) <= 1:
                    continue
                if item.startswith(";"):
                    continue
                if item[0] == "X":
                    x = float(item[1:])
                if item[0] == "Y":
                    y = float(item[1:])
                if item[0] == "Z":
                    z = float(item[1:])
                if item[0] == "F":
                    f = float(item[1:]) / 60
                if item[0] == "E":
                    e = float(item[1:])
            params = PositionOptional(x, y, z, f, e)
            return func(position, params, path)
        return position

    def processTCode(self, T: int, line: str, position: Position, path: List[List[Union[float, int]]]) -> Position:
        self._extruder_number = T
        if self._extruder_number + 1 > len(position.e):
            self._extrusion_length_offset.extend([0] * (self._extruder_number - len(position.e) + 1))
            position.e.extend([0] * (self._extruder_number - len(position.e) + 1))
        return position

    def processMCode(self, M: int, line: str, position: Position, path: List[List[Union[float, int]]]) -> Position:
        pass

    _type_keyword = ";TYPE:"
    _layer_keyword = ";LAYER:"

    ##  For showing correct x, y offsets for each extruder
    def _extruderOffsets(self) -> Dict[int, List[float]]:
        result = {}
        for extruder in ExtruderManager.getInstance().getActiveExtruderStacks():
            result[int(extruder.getMetaData().get("position", "0"))] = [
                extruder.getProperty("machine_nozzle_offset_x", "value"),
                extruder.getProperty("machine_nozzle_offset_y", "value")]
        return result

    #
    # CURA-6643
    # This function needs the filename so it can be set to the SceneNode. Otherwise, if you load a GCode file and press
    # F5, that gcode SceneNode will be removed because it doesn't have a file to be reloaded from.
    #
    def processGCodeStream(self, stream: str, filename: str) -> Optional["CuraSceneNode"]:
        Logger.log("d", "Preparing to load GCode")
        self._cancelled = False
        # We obtain the filament diameter from the selected extruder to calculate line widths
        global_stack = CuraApplication.getInstance().getGlobalContainerStack()

        if not global_stack:
            return None

        self._filament_diameter = global_stack.extruders[str(self._extruder_number)].getProperty("material_diameter", "value")

        scene_node = CuraSceneNode()

        gcode_list = []
        self._is_layers_in_file = False

        self._extruder_offsets = self._extruderOffsets()  # dict with index the extruder number. can be empty

        ##############################################################################################
        ##  This part is where the action starts
        ##############################################################################################
        file_lines = 0
        current_line = 0
        for line in stream.split("\n"):
            file_lines += 1
            gcode_list.append(line + "\n")
            if not self._is_layers_in_file and line[:len(self._layer_keyword)] == self._layer_keyword:
                self._is_layers_in_file = True

        file_step = max(math.floor(file_lines / 100), 1)

        self._clearValues()

        self._message = Message(catalog.i18nc("@info:status", "Parsing G-code"),
                                lifetime=0,
                                title = catalog.i18nc("@info:title", "G-code Details"))

        assert(self._message is not None) # use for typing purposes
        self._message.setProgress(0)
        self._message.show()

        Logger.log("d", "Parsing Gcode...")

        current_position = Position(0, 0, 0, 0, [0])
        current_path = [] #type: List[List[float]]
        min_layer_number = 0
        negative_layers = 0
        previous_layer = 0
        self._previous_extrusion_value = 0.0

        for line in stream.split("\n"):
            if self._cancelled:
                Logger.log("d", "Parsing Gcode file cancelled")
                return None
            current_line += 1

            if current_line % file_step == 0:
                self._message.setProgress(math.floor(current_line / file_lines * 100))
                Job.yieldThread()
            if len(line) == 0:
                continue

            if line.find(self._type_keyword) == 0:
                type = line[len(self._type_keyword):].strip()
                if type == "WALL-INNER":
                    self._layer_type = LayerPolygon.InsetXType
                elif type == "WALL-OUTER":
                    self._layer_type = LayerPolygon.Inset0Type
                elif type == "SKIN":
                    self._layer_type = LayerPolygon.SkinType
                elif type == "SKIRT":
                    self._layer_type = LayerPolygon.SkirtType
                elif type == "SUPPORT":
                    self._layer_type = LayerPolygon.SupportType
                elif type == "FILL":
                    self._layer_type = LayerPolygon.InfillType
                elif type == "SUPPORT-INTERFACE":
                    self._layer_type = LayerPolygon.SupportInterfaceType
                elif type == "PRIME-TOWER":
                    self._layer_type = LayerPolygon.PrimeTowerType
                else:
                    Logger.log("w", "Encountered a unknown type (%s) while parsing g-code.", type)

            # When the layer change is reached, the polygon is computed so we have just one layer per extruder
            if self._is_layers_in_file and line[:len(self._layer_keyword)] == self._layer_keyword:
                try:
                    layer_number = int(line[len(self._layer_keyword):])
                    self._createPolygon(self._current_layer_thickness, current_path, self._extruder_offsets.get(self._extruder_number, [0, 0]))
                    current_path.clear()
                    # Start the new layer at the end position of the last layer
                    current_path.append([current_position.x, current_position.y, current_position.z, current_position.f, current_position.e[self._extruder_number], LayerPolygon.MoveCombingType])

                    # When using a raft, the raft layers are stored as layers < 0, it mimics the same behavior
                    # as in ProcessSlicedLayersJob
                    if layer_number < min_layer_number:
                        min_layer_number = layer_number
                    if layer_number < 0:
                        layer_number += abs(min_layer_number)
                        negative_layers += 1
                    else:
                        layer_number += negative_layers

                    # In case there is a gap in the layer count, empty layers are created
                    for empty_layer in range(previous_layer + 1, layer_number):
                        self._createEmptyLayer(empty_layer)

                    self._layer_number = layer_number
                    previous_layer = layer_number
                except:
                    pass

            # This line is a comment. Ignore it (except for the layer_keyword)
            if line.startswith(";"):
                continue

            G = self._getInt(line, "G")
            if G is not None:
                # When find a movement, the new posistion is calculated and added to the current_path, but
                # don't need to create a polygon until the end of the layer
                current_position = self.processGCode(G, line, current_position, current_path)
                continue

            # When changing the extruder, the polygon with the stored paths is computed
            if line.startswith("T"):
                T = self._getInt(line, "T")
                if T is not None:
                    self._extruders_seen.add(T)
                    self._createPolygon(self._current_layer_thickness, current_path, self._extruder_offsets.get(self._extruder_number, [0, 0]))
                    current_path.clear()

                    # When changing tool, store the end point of the previous path, then process the code and finally
                    # add another point with the new position of the head.
                    current_path.append([current_position.x, current_position.y, current_position.z, current_position.f, current_position.e[self._extruder_number], LayerPolygon.MoveCombingType])
                    current_position = self.processTCode(T, line, current_position, current_path)
                    current_path.append([current_position.x, current_position.y, current_position.z, current_position.f, current_position.e[self._extruder_number], LayerPolygon.MoveCombingType])

            if line.startswith("M"):
                M = self._getInt(line, "M")
                if M is not None:
                    self.processMCode(M, line, current_position, current_path)

        # "Flush" leftovers. Last layer paths are still stored
        if len(current_path) > 1:
            if self._createPolygon(self._current_layer_thickness, current_path, self._extruder_offsets.get(self._extruder_number, [0, 0])):
                self._layer_number += 1
                current_path.clear()

        material_color_map = numpy.zeros((8, 4), dtype = numpy.float32)
        material_color_map[0, :] = [0.0, 0.7, 0.9, 1.0]
        material_color_map[1, :] = [0.7, 0.9, 0.0, 1.0]
        material_color_map[2, :] = [0.9, 0.0, 0.7, 1.0]
        material_color_map[3, :] = [0.7, 0.0, 0.0, 1.0]
        material_color_map[4, :] = [0.0, 0.7, 0.0, 1.0]
        material_color_map[5, :] = [0.0, 0.0, 0.7, 1.0]
        material_color_map[6, :] = [0.3, 0.3, 0.3, 1.0]
        material_color_map[7, :] = [0.7, 0.7, 0.7, 1.0]
        layer_mesh = self._layer_data_builder.build(material_color_map)
        decorator = LayerDataDecorator()
        decorator.setLayerData(layer_mesh)
        scene_node.addDecorator(decorator)

        gcode_list_decorator = GCodeListDecorator()
        gcode_list_decorator.setGcodeFileName(filename)
        gcode_list_decorator.setGCodeList(gcode_list)
        scene_node.addDecorator(gcode_list_decorator)

        # gcode_dict stores gcode_lists for a number of build plates.
        active_build_plate_id = CuraApplication.getInstance().getMultiBuildPlateModel().activeBuildPlate
        gcode_dict = {active_build_plate_id: gcode_list}
        CuraApplication.getInstance().getController().getScene().gcode_dict = gcode_dict #type: ignore #Because gcode_dict is generated dynamically.

        Logger.log("d", "Finished parsing Gcode")
        self._message.hide()

        if self._layer_number == 0:
            Logger.log("w", "File doesn't contain any valid layers")

        if not global_stack.getProperty("machine_center_is_zero", "value"):
            machine_width = global_stack.getProperty("machine_width", "value")
            machine_depth = global_stack.getProperty("machine_depth", "value")
            scene_node.setPosition(Vector(-machine_width / 2, 0, machine_depth / 2))

        Logger.log("d", "GCode loading finished")

        if CuraApplication.getInstance().getPreferences().getValue("gcodereader/show_caution"):
            caution_message = Message(catalog.i18nc(
                "@info:generic",
                "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."),
                lifetime=0,
                title = catalog.i18nc("@info:title", "G-code Details"))
            caution_message.show()

        # The "save/print" button's state is bound to the backend state.
        backend = CuraApplication.getInstance().getBackend()
        backend.backendStateChange.emit(Backend.BackendState.Disabled)

        return scene_node