ultimaker2_plus_connect_0.25.inst.cfg 565 B

1234567891011121314151617181920212223
  1. [general]
  2. definition = ultimaker2_plus_connect
  3. name = 0.25 mm
  4. version = 4
  5. [metadata]
  6. hardware_type = nozzle
  7. setting_version = 21
  8. type = variant
  9. [values]
  10. coasting_min_volume = 0.17
  11. coasting_volume = 0.1
  12. cool_min_layer_time = 0
  13. machine_nozzle_size = 0.25
  14. machine_nozzle_tip_outer_diameter = 0.8
  15. raft_airgap = 0.25
  16. retraction_prime_speed = =retraction_speed
  17. speed_topbottom = =round(speed_print / 1.5, 1)
  18. speed_wall = =round(speed_print / 1.2, 1)
  19. speed_wall_0 = =1 if speed_wall < 5 else (speed_wall - 5)
  20. wall_thickness = =wall_line_width_0 + wall_line_width_x * 2