Cura/resources/definitions/strateo3d.def.json

{
    "version": 2,
    "name": "Strateo3D",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "eMotionTech",
        "manufacturer": "eMotionTech",
        "file_formats": "text/x-gcode",
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "strateo3d_right_extruder",
            "1": "strateo3d_left_extruder"
        },
        "preferred_material": "emotiontech_pla",
        "preferred_quality_type": "c",
        "preferred_variant_name": "Standard 0.6",
        "variants_name": "Print Head"
    },
    "overrides":
    {
        "acceleration_enabled": { "value": false },
        "acceleration_infill": { "maximum_value_warning": "1500" },
        "acceleration_layer_0":
        {
            "maximum_value_warning": "1500",
            "value": "acceleration_topbottom"
        },
        "acceleration_prime_tower": { "maximum_value_warning": "1500" },
        "acceleration_print":
        {
            "maximum_value_warning": "1500",
            "value": "machine_acceleration"
        },
        "acceleration_print_layer_0": { "maximum_value_warning": "1500" },
        "acceleration_skirt_brim": { "maximum_value_warning": "1500" },
        "acceleration_support":
        {
            "maximum_value_warning": "1500",
            "value": "acceleration_print"
        },
        "acceleration_support_bottom": { "maximum_value_warning": "1500" },
        "acceleration_support_infill": { "maximum_value_warning": "1500" },
        "acceleration_support_interface":
        {
            "maximum_value_warning": "1500",
            "value": "acceleration_topbottom"
        },
        "acceleration_support_roof": { "maximum_value_warning": "1500" },
        "acceleration_topbottom":
        {
            "maximum_value_warning": "1500",
            "value": "math.ceil(acceleration_print * 1250 / acceleration_print)"
        },
        "acceleration_travel":
        {
            "maximum_value_warning": "1500",
            "value": "acceleration_print"
        },
        "acceleration_travel_layer_0": { "maximum_value_warning": "1500" },
        "acceleration_wall":
        {
            "maximum_value_warning": "1500",
            "value": "math.ceil(acceleration_print * 1250 / acceleration_print)"
        },
        "acceleration_wall_0":
        {
            "maximum_value_warning": "1500",
            "value": "math.ceil(acceleration_print * 1000 / acceleration_print)"
        },
        "acceleration_wall_x": { "maximum_value_warning": "1500" },
        "adaptive_layer_height_variation": { "default_value": 0.1 },
        "adaptive_layer_height_variation_step": { "default_value": 0.05 },
        "adhesion_type": { "default_value": "skirt" },
        "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))" },
        "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" },
        "default_material_print_temperature":
        {
            "maximum_value": "415",
            "maximum_value_warning": "400"
        },
        "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" },
        "extruder_prime_pos_abs": { "default_value": true },
        "extruder_prime_pos_x":
        {
            "maximum_value": "machine_width",
            "minimum_value": "0"
        },
        "extruder_prime_pos_y":
        {
            "maximum_value": "machine_depth",
            "minimum_value": "0"
        },
        "gantry_height": { "value": "40" },
        "gradual_infill_step_height": { "value": "layer_height*10" },
        "gradual_support_infill_step_height": { "value": "layer_height*7" },
        "infill_before_walls": { "default_value": false },
        "infill_overlap": { "value": "0" },
        "infill_wipe_dist": { "value": "0" },
        "jerk_enabled":
        {
            "maximum_value_warning": "0.01",
            "value": "False"
        },
        "jerk_infill":
        {
            "maximum_value_warning": "0.01",
            "value": "0.01"
        },
        "jerk_layer_0":
        {
            "maximum_value_warning": "0.01",
            "value": "jerk_topbottom"
        },
        "jerk_prime_tower":
        {
            "maximum_value_warning": "0.01",
            "value": "jerk_print * 15 / 25"
        },
        "jerk_print":
        {
            "maximum_value_warning": "0.01",
            "value": "0.01"
        },
        "jerk_print_layer_0": { "maximum_value_warning": "0.01" },
        "jerk_skirt_brim": { "maximum_value_warning": "0.01" },
        "jerk_support":
        {
            "maximum_value_warning": "0.01",
            "value": "jerk_print * 15 / 25"
        },
        "jerk_support_bottom": { "maximum_value_warning": "0.01" },
        "jerk_support_infill": { "maximum_value_warning": "0.01" },
        "jerk_support_interface":
        {
            "maximum_value_warning": "0.01",
            "value": "jerk_topbottom"
        },
        "jerk_support_roof": { "maximum_value_warning": "0.01" },
        "jerk_topbottom":
        {
            "maximum_value_warning": "0.01",
            "value": "jerk_print * 5 / 25"
        },
        "jerk_travel":
        {
            "maximum_value_warning": "0.01",
            "value": "machine_max_jerk_xy"
        },
        "jerk_travel_layer_0": { "maximum_value_warning": "0.01" },
        "jerk_wall":
        {
            "maximum_value_warning": "0.01",
            "value": "jerk_print * 5 / 25"
        },
        "jerk_wall_0":
        {
            "maximum_value_warning": "0.01",
            "value": "jerk_wall * 5 / 10"
        },
        "jerk_wall_x": { "maximum_value_warning": "0.01" },
        "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
        "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
        "machine_acceleration": { "default_value": 1500 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 420 },
        "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 z1 \nG90 \nG28 \nM801.0 \nM84 \nM192" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_gcode_flavor": { "default_value": "Marlin" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-76, -51.8],
                [25, -51.8],
                [25, 38.2],
                [-76, 38.2]
            ]
        },
        "machine_heat_zone_length": { "default_value": 7 },
        "machine_heated_bed": { "default_value": true },
        "machine_heated_build_volume": { "default_value": true },
        "machine_height": { "default_value": 495 },
        "machine_max_jerk_xy": { "default_value": 0.01 },
        "machine_max_jerk_z": { "default_value": 0 },
        "machine_min_cool_heat_time_window": { "value": "15" },
        "machine_name": { "default_value": "Strateo3D" },
        "machine_nozzle_cool_down_speed": { "default_value": 0.5 },
        "machine_nozzle_heat_up_speed": { "default_value": 2.25 },
        "machine_start_gcode": { "default_value": ";M104 T0 S{material_standby_temperature, 0} \n;M104 T1 S{material_standby_temperature, 1} \n;M140 S{material_bed_temperature_layer_0} \n;M141 S{build_volume_temperature} \nG28 \nG90 \nT{initial_extruder_nr} \nG1 X0 Y0 Z15 F6000 \n;M190 S{material_bed_temperature_layer_0} \n;M109 S{material_print_temperature_layer_0, initial_extruder_nr} \nG1 Z0.3 \nG92 E0 \nG1 F300 X45 E18 \n;G1 F1500 E17 \nG1 F600 X25 \nG1 F600 Z3" },
        "machine_width": { "default_value": 600 },
        "material_bed_temperature":
        {
            "maximum_value": "140",
            "maximum_value_warning": "140"
        },
        "material_bed_temperature_layer_0":
        {
            "maximum_value": "140",
            "maximum_value_warning": "140"
        },
        "material_final_print_temperature":
        {
            "maximum_value": "415",
            "maximum_value_warning": "400"
        },
        "material_flow": { "default_value": 93 },
        "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" },
        "material_initial_print_temperature":
        {
            "maximum_value": "415",
            "maximum_value_warning": "400"
        },
        "material_print_temperature":
        {
            "maximum_value": "415",
            "maximum_value_warning": "400"
        },
        "material_print_temperature_layer_0":
        {
            "maximum_value": "415",
            "maximum_value_warning": "400"
        },
        "material_standby_temperature":
        {
            "maximum_value": "material_print_temperature",
            "maximum_value_warning": "material_print_temperature - 40"
        },
        "meshfix_maximum_deviation": { "default_value": 0.04 },
        "meshfix_maximum_resolution": { "value": "0.5" },
        "optimize_wall_printing_order": { "value": "True" },
        "prime_blob_enable":
        {
            "default_value": false,
            "enabled": false
        },
        "prime_tower_min_volume": { "default_value": 35 },
        "prime_tower_position_x": { "value": "machine_width/2 + prime_tower_size/2" },
        "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
        "retraction_amount": { "default_value": 1.5 },
        "retraction_combing": { "value": "'all'" },
        "retraction_combing_max_distance": { "default_value": 5 },
        "retraction_count_max": { "default_value": 15 },
        "retraction_hop": { "value": "2" },
        "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
        "retraction_hop_only_when_collides": { "value": "True" },
        "retraction_min_travel": { "value": "3*line_width" },
        "retraction_prime_speed": { "value": "retraction_speed-10" },
        "retraction_speed": { "default_value": 25 },
        "skin_overlap": { "value": "10" },
        "skirt_brim_minimal_length": { "default_value": 333 },
        "speed_layer_0": { "value": "20" },
        "speed_prime_tower": { "value": "speed_topbottom" },
        "speed_print": { "value": "50" },
        "speed_support": { "value": "speed_wall" },
        "speed_support_interface": { "value": "speed_topbottom" },
        "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" },
        "speed_travel": { "value": "150" },
        "speed_travel_layer_0": { "value": "100" },
        "speed_wall": { "value": "math.ceil(speed_print * 3/4)" },
        "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" },
        "speed_wall_x": { "value": "speed_wall" },
        "support_angle": { "value": "50" },
        "support_bottom_distance":
        {
            "maximum_value_warning": "machine_nozzle_size*1.5",
            "value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0"
        },
        "support_interface_enable": { "default_value": true },
        "support_interface_height": { "value": "layer_height*3" },
        "support_interface_offset": { "value": "support_offset" },
        "support_top_distance":
        {
            "maximum_value_warning": "machine_nozzle_size*1.5",
            "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')"
        },
        "support_use_towers": { "default_value": true },
        "support_xy_distance": { "value": "line_width * 1.7" },
        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
        "support_z_distance":
        {
            "maximum_value_warning": "machine_nozzle_size*1.5",
            "value": "layer_height*2"
        },
        "switch_extruder_prime_speed": { "value": "retraction_prime_speed" },
        "switch_extruder_retraction_amount": { "value": "7" },
        "switch_extruder_retraction_speeds": { "value": "retraction_retract_speed" },
        "top_bottom_thickness":
        {
            "minimum_value_warning": "layer_height*2",
            "value": "3*layer_height"
        },
        "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" },
        "top_thickness": { "value": "top_bottom_thickness" },
        "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
        "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }
    }
}