example_data.html 2.2 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071
  1. <html>
  2. <body>
  3. <b>Cura Version:</b> 4.8<br/>
  4. <b>Operating System:</b> Windows 10<br/>
  5. <b>Language:</b> en_US<br/>
  6. <b>Machine Type:</b> Ultimaker S5<br/>
  7. <b>Intent Profile:</b> Default<br/>
  8. <b>Quality Profile:</b> Fast<br/>
  9. <b>Using Custom Settings:</b> No<br/>
  10. <b>Organization ID (if any):</b> ABCDefGHIjKlMNOpQrSTUvYxWZ0-1234567890abcDE=<br/>
  11. <b>Subscriptions (if any):</b>
  12. <ul>
  13. <li><b>Level:</b> 10, <b>Type:</b> Enterprise, <b>Plan:</b> Basic</li>
  14. </ul>
  15. <h3>Extruder 1:</h3>
  16. <ul>
  17. <li><b>Material Type:</b> PLA</li>
  18. <li><b>Print Core:</b> AA 0.4</li>
  19. <li><b>Material Used:</b> 1240 mm</li>
  20. </ul>
  21. <h3>Extruder 2:</h3>
  22. <ul>
  23. <li><b>Material Type:</b> PVA</li>
  24. <li><b>Print Core:</b> BB 0.4</li>
  25. <li><b>Material Used:</b> 432 mm</li>
  26. </ul>
  27. <h3>Print Settings:</h3>
  28. <ul>
  29. <li><b>Layer Height:</b> 0.15</li>
  30. <li><b>Wall Line Count:</b> 3</li>
  31. <li><b>Enable Retraction:</b> no</li>
  32. <li><b>Infill Density:</b> 20%</li>
  33. <li><b>Infill Pattern:</b> triangles</li>
  34. <li><b>Gradual Infill Steps:</b> 0</li>
  35. <li><b>Printing Temperature:</b> 220 °C</li>
  36. <li><b>Generate Support:</b> yes</li>
  37. <li><b>Support Extruder:</b> 1</li>
  38. <li><b>Build Plate Adhesion Type:</b> brim</li>
  39. <li><b>Enable Prime Tower:</b> yes</li>
  40. <li><b>Print Sequence:</b> All at once</li>
  41. <li>...</li>
  42. </ul>
  43. <h3>Model Information:</h3>
  44. <ul>
  45. <li>
  46. <b>Model 1</b>
  47. <ul>
  48. <li><b>Hash:</b> b72789b9b...</li>
  49. <li><b>Transformation:</b> [transformation matrix]</li>
  50. <li><b>Bounding Box:</b> [minimum x, y, z; maximum x, y, z]</li>
  51. <li><b>Is Helper Mesh:</b> no</li>
  52. <li><b>Helper Mesh Type:</b> support mesh</li>
  53. <li><b>File type:</b> STL</li>
  54. </ul>
  55. </li>
  56. </ul>
  57. <h3>Print Times:</h3>
  58. <ul>
  59. <li>Infill: 61200 sec.</li>
  60. <li>Support: 25480 sec.</li>
  61. <li>Travel: 6224 sec.</li>
  62. <li>Walls: 10225 sec.</li>
  63. <li>Total: 103129 sec.</li>
  64. </ul>
  65. </body>
  66. </html>