dagoma_sigma_0.4.inst.cfg 2.0 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576
  1. [general]
  2. definition = dagoma_sigma
  3. name = 0.4mm
  4. version = 4
  5. [metadata]
  6. hardware_type = nozzle
  7. setting_version = 22
  8. type = variant
  9. [values]
  10. acceleration_enabled = True
  11. acceleration_infill = 3000
  12. acceleration_print = 1500
  13. acceleration_travel = 1500
  14. acceleration_travel_layer_0 = 2000
  15. acceleration_wall_0 = 850
  16. acceleration_wall_x = 1600
  17. bridge_fan_speed_2 = 100.0
  18. bridge_fan_speed_3 = 100.0
  19. bridge_settings_enabled = True
  20. bridge_skin_density = 95.0
  21. bridge_skin_density_2 = 85.0
  22. bridge_skin_density_3 = 95.0
  23. bridge_wall_min_length = 2.0
  24. bridge_wall_speed = 25.0
  25. carve_multiple_volumes = True
  26. coasting_enable = True
  27. cool_fan_full_at_height = 0.6
  28. cool_min_layer_time = 6.0
  29. cool_min_speed = 5.0
  30. infill_overlap = 2.0
  31. infill_sparse_density = 15
  32. infill_sparse_thickness = 0.4
  33. infill_wall_line_count = 1
  34. layer_height_0 = 0.25
  35. line_width = 0.4
  36. machine_nozzle_id = 0.4mm
  37. machine_nozzle_size = 0.4
  38. retract_at_layer_change = True
  39. retraction_combing = noskin
  40. retraction_combing_max_distance = 5.0
  41. retraction_count_max = 25
  42. retraction_extrusion_window = 1.0
  43. retraction_hop = 0.0
  44. retraction_hop_enabled = True
  45. retraction_speed = 45
  46. roofing_layer_count = 1
  47. roofing_line_width = 0.3
  48. roofing_material_flow = 95
  49. roofing_monotonic = True
  50. skin_outline_count = 2
  51. skirt_gap = 2.0
  52. small_hole_max_size = 4.0
  53. speed_infill = 60
  54. speed_layer_0 = 14
  55. speed_travel = 140
  56. speed_travel_layer_0 = 27
  57. support_angle = 50.0
  58. support_fan_enable = True
  59. support_infill_rate = =15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15
  60. support_infill_sparse_thickness = =resolveOrValue('layer_height')
  61. support_interface_enable = False
  62. support_interface_height = 1.0
  63. support_interface_pattern = zigzag
  64. support_structure = tree
  65. support_top_distance = 0.1
  66. support_type = buildplate
  67. support_xy_distance = 1.5
  68. support_xy_distance_overhang = =machine_nozzle_size / 2
  69. support_z_distance = 0.2
  70. top_bottom_thickness = 0.8
  71. top_thickness = 0.8
  72. travel_avoid_distance = 3.0
  73. travel_avoid_supports = True