Cura/resources/quality/snakeoilxy/snakeoilxy_global_fine_quality.inst.cfg

[general]
definition = snakeoil_standard_base
name = Fine
version = 4

[metadata]
global_quality = True
quality_type = fine
setting_version = 22
type = quality

[values]
acceleration_enabled = True
acceleration_print = 15000
acceleration_roofing = 10000
acceleration_topbottom = 10000
acceleration_travel = 15000
acceleration_wall = 7500
acceleration_wall_0 = 7500
adhesion_type = skirt
alternate_extra_perimeter = False
cool_min_layer_time = 10
infill_line_width = 0.5
infill_pattern = gyroid
infill_sparse_density = 15
inset_direction = outside_in
layer_height = 0.2
layer_height_0 = 0.2
optimize_wall_printing_order = True
retraction_amount = 0.8
retraction_combing = noskin
retraction_hop = 0.2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_speed = 35
roofing_layer_count = 1
skin_monotonic = True
skirt_brim_speed = 45
speed_infill = 150
speed_layer_0 = 45
speed_print = 100
speed_roofing = 100
speed_topbottom = 100
speed_travel = 300
speed_travel_layer_0 = 60
speed_wall = 100
speed_wall_0 = 75
speed_wall_x = 100
support_angle = 46
support_enable = False
top_bottom_thickness = 0.8
travel_avoid_supports = True
wall_line_width = 0.45
wall_line_width_0 = 0.4
wall_thickness = 1.65
zig_zaggify_infill = True