nwa3d_a31_e.inst.cfg 3.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115
  1. [general]
  2. definition = nwa3d_a31
  3. name = 0.6 Engineering Quality
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = Engineering
  8. setting_version = 22
  9. type = quality
  10. weight = -2
  11. [values]
  12. acceleration_enabled = False
  13. adhesion_type = skirt
  14. alternate_extra_perimeter = False
  15. bottom_layers = 3
  16. carve_multiple_volumes = False
  17. cool_fan_enabled = True
  18. cool_fan_full_layer = 3
  19. cool_fan_speed = 100
  20. cool_fan_speed_0 = 0
  21. cool_lift_head = False
  22. default_material_bed_temperature = 50
  23. default_material_print_temperature = 220
  24. fill_outline_gaps = True
  25. gradual_infill_steps = 0
  26. gradual_support_infill_steps = 0
  27. infill_before_walls = False
  28. infill_multiplier = 1
  29. infill_overlap = 10
  30. infill_sparse_density = 15
  31. infill_support_enabled = False
  32. infill_wall_line_count = 0
  33. infill_wipe_dist = 0.15
  34. initial_layer_line_width_factor = 100
  35. ironing_enabled = False
  36. jerk_enabled = False
  37. layer_height = 0.28
  38. layer_height_0 = 0.4
  39. line_width = 0.6
  40. material_bed_temperature = 50
  41. material_final_print_temperature = 220
  42. material_flow = 100
  43. material_initial_print_temperature = 220
  44. material_print_temperature = 220
  45. material_print_temperature_layer_0 = 220
  46. max_skin_angle_for_expansion = 90
  47. meshfix_extensive_stitching = False
  48. meshfix_keep_open_polygons = False
  49. meshfix_union_all = True
  50. meshfix_union_all_remove_holes = False
  51. multiple_mesh_overlap = 0.16
  52. optimize_wall_printing_order = False
  53. retract_at_layer_change = False
  54. retraction_amount = 5
  55. retraction_combing = off
  56. retraction_count_max = 90
  57. retraction_enable = True
  58. retraction_extra_prime_amount = 0
  59. retraction_extrusion_window = 5
  60. retraction_hop_enabled = False
  61. retraction_min_travel = 1.2
  62. retraction_speed = 45
  63. roofing_layer_count = 1
  64. skin_no_small_gaps_heuristic = True
  65. skin_outline_count = 1
  66. skin_overlap = 5
  67. skirt_gap = 3
  68. skirt_line_count = 2
  69. speed_layer_0 = 10
  70. speed_print = 40
  71. speed_slowdown_layers = 2
  72. speed_travel = 150
  73. speed_travel_layer_0 = 40
  74. support_angle = 50
  75. support_bottom_enable = False
  76. support_bottom_stair_step_height = 0.3
  77. support_bottom_stair_step_width = 5.0
  78. support_brim_enable = True
  79. support_brim_line_count = 5
  80. support_enable = True
  81. support_fan_enable = False
  82. support_infill_angles = [0]
  83. support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
  84. support_join_distance = 2.0
  85. support_offset = 0.2
  86. support_pattern = grid
  87. support_roof_density = 45
  88. support_roof_enable = True
  89. support_roof_height = .45
  90. support_roof_pattern = grid
  91. support_tower_diameter = 3
  92. support_tower_roof_angle = 65
  93. support_type = everywhere
  94. support_use_towers = True
  95. support_wall_count = 0
  96. support_xy_distance = 0.7
  97. support_xy_distance_overhang = 0.2
  98. support_z_distance = 0.34
  99. switch_extruder_retraction_amount = 16
  100. switch_extruder_retraction_speeds = 20
  101. top_bottom_pattern = lines
  102. top_bottom_pattern_0 = lines
  103. top_bottom_thickness = 1.2
  104. top_layers = 5
  105. travel_retract_before_outer_wall = False
  106. wall_0_inset = 0
  107. wall_0_wipe_dist = 0.2
  108. wall_line_width_0 = 0.6
  109. wall_thickness = 1.2
  110. xy_offset = 0
  111. zig_zaggify_infill = False
  112. zig_zaggify_support = False